Skip to end of banner
Go to start of banner

Get a New Card

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 54 Next »

OVERVIEW

This page is intended to explain how to get a new LaundryCard in various ways using cash and credit cards.

ON THIS PAGE


Get A New Card Using Cash

Follow these steps to purchase a new LaundryCard.

  1. From the Home Screen, select English or Espanol on the X-Changer touch screen to choose your desired language. 
  2. Select the option Get a new card from the menu. 
  3. Insert cash.
  4. After each bill is entered, the screen shows how much money is on your card.  **There may be a deposit required to dispense a card.  If so, it will display under the balance and will NOT dispense until the deposit is met or exceeded.  
  5. Select Dispense Card and your new card will be dispensed. 
  6. Take your new card from the dispenser
  7. When you insert your new card into the reader, your card's main menu will appear


Get a New Card Using a Credit Card (C-1008 Ingenico EMV Bezel)

In some locations it may be possible to use your credit card to purchase a new card. If this feature is available, then you will see an option on the screen that you may select to use a credit card. Once this option is selected, you will be guided through inserting, swiping, or using an NFC capable device or card on the credit card bezel. A receipt may be available from a remote printer in the store.  See the store attendant for the location of the receipt printer, or follow the onscreen instructions.  Follow the instructions below to use a credit card.

NON-EMV CREDIT CARDS, SUCH AS RETAIL STORE CARDS, ARE NOT ACCEPTED

Non-EMV credit cards such as a Kohl's charge card or a Home Depot charge card are NOT ACCEPTED to add value or purchase a new LaundryCard.

  1. From the Home Screen, select either English or Espanol.


  2. Select the Credit/Debit icon in in the top left corner of the screen.


  3. Enter the amount you wish to add to the card.
  4. Click Submit.


  5. Clicking "Submit" will direct you to follow the credit card bezel prompts to complete the process.


  6. Click the yellow Start button on the bezel to approve the amount.  Click the red Stop button to cancel the transaction.


  7. When prompted, you may either Insert your chip card, hold your tap-to-charge card against the reader, use a smart device (e.g. iPhone ApplePay or Android Google Pay), or slide your card when no other option is available (e.g. a prepaid card) to continue.


  8. When processing, you'll notice the type of card described on the bezel as well as prompting to not remove the card.


  9. Wait until the card system is finished processing the transaction.
  10. Once the system prompts to remove the card, it's safe to remove it.


  11. Once the transaction is approved, select Print Receipt and Continue, or Continue without Receipt.


  12. The transaction is complete and the newly added amount will appear on the card balance screen on the X-Changer.

Get a New Card Using a Credit Card (C-1009 EMV Bezel)

In some locations, a different EMV Bezel may be in use than an Ingenico reader, which is housed over the bill acceptor's cash insert section. While capabilities may be similar (chip insert, NFC, swipe fallback), the process differs slightly.

  1. From the Home Screen, select either English or Espanol.


  2. Select Get a new card 


  3. Select the Credit/Debit icon in in the top left corner of the screen.


  4. Either Insert/Tap/Swipe the chosen credit card in order to advance to the transfer amount screen.

    Chip Insert

    Tap-To-Charge NFC

    Smartphone NFC

    Swipe

  5. Enter the amount you wish to add to the card.


  6. Click Submit.
  7. The amount will be approved and added to the balance of the card.


  8. The value of $1.00 was added to the new LaundryCard.
  • No labels