Overview
This document is intended to guide the user through installation utilizing the kit numbered according to the document title. A list of associated equipment models including control information and additional installation notes can be found below.
Install Header
Required Hardware
Card Reader
Part ID Description C-5001
F2 Install Header
Required Hardware
Card Reader
Part ID Description C-5401
Reader Ports
Additional Info
Unverified
ACA Dip Switches
ACA machines using a serial configuration require dip switch 3 on the Machine Control Assembly to be set to the 'ON' position. All other dip switches should remain in the 'OFF' position.
ACA Card Ready
ACA Card Ready machines using a pulse configuration require a retrofit to a Coin-Ready state. This may require obtaining an additional Coin Sense Harness from Alliance.
Description | Link/Source | Image |
|---|---|---|
| Champion CT7-1-1/8 Tungsten Carbide Tipped 1-1/8-Inch Hole Cutter-1-Inch Thick Metal (Or Equivalent) |  | |
| Cutting Oil | Amazon |  |
9/64" Drill Bit (Optional) | Amazon |  |
| Heavy Duty Professional 3/8" Magnesium Drill with #2 drill tip extension. (Or Equivalent) | Harbor Freight |  |
| Center Punch (Or Equivalent) | Amazon |  |
| Hammer | Amazon |  |
| Fine Point Sharpie Marker (Or Equivalent) | Amazon |  |
| Pliers (Or Equivalent) | Amazon |  |
| Tape Measure | Amazon |  |
| C-5700-TEMP FasCard Drill Template *Included in C-1490 Kit | CCI |
|
