- Plug in the UPS/Battery Backup unit into the 120 VAC power outlet. The battery backup unit is mounted in the cabinet and is the first device from the bottom of the equipment rack, the device is manufactured by TRIPP-LITE. The power cord will be neatly folded and bound with a twist tie, unwrap the cable and plug the cord into the outlet.
- Power up the X-Changer cabinet by pressing the power button located on the UPS power supply.
- Verify that the cooling fan is running in the cabinet, the cooling fan is located int the upper corner of the cabinet.
- The computer and other associated devices should start to power up, the power up sequence takes approximately 2 minutes to complete.
- If the computer does not power up you may have to press the power button one time, if the power button lights up with any color other than green, contact CCI technical support.
- Make sure that the EPC (Ethernet Power Controller) has all of the switches in the 'Remote' position. Failure to set this properly will prohibit the system from remote reboot opportunities.
The factory should have the switches already in the correct position, this step only confirms nothing has moved in transit.
General
Content
Integrations