LaundryCard Hardware Identification

X-Changer Cabinet

Version 1A

The first generation of X-Changer cabinet.

Defining Features:

• The front and rear doors were inset rather then wrapped around the cabinet, removable and replaceable.
• The graphics on the front of the cabinet were silk screened directly onto the steel.
• Only 10 cabinets were built and shipped to customers of this version.

Version 1B

Defining Features:

• The doors were permanently mounted and was not removable.
• The doors were also changed so that the edges of the doors wrapped around the cabinet eliminating any pry points on the door.
• The graphics were silk screened directly to the steel.
• 20 cabinets were built and shipped to customers of this version.

Version 1C

Defining Features:

• A 4 piece removable frame was created and mounted allowing the graphics to be applied to a clear acrylic panel.
• The printed graphic panel could be changed and replaced at the store owners request. T
• his version also allowed us to design a retrofit kit that would allow a LCD flat screen touch-screen to be used in replacement of the CRT monitor.

Version 2A

Defining features:

• New smaller dimensions
• Single lock on each access door
• Flat panel monitor

Version 2B

Defining features:

• New graphic acrylic
• Component rack has been shifted right 1/2"
• Pre-drilled holes for the EMV chip reader mount

Lite

Defining Features:

• Smaller than V2 X-Changer
• Computer and monitor are all in one integrated
• Door can be mounted on front or rear of unit
• No acrylic panel. Graphics applied directly to cabinet.

Computer

Touch Screen (Display / Monitor)

Ethernet Power Controller (EPC) / Power Strip

Barcode Scanner

Card Readers - Local card reader mounted on the X-Changers

Bill Acceptors

Reader Control Unit (Control Head)

Firewalls - Current Model Mikrotik hEX Lite

Credit Card Readers

Internal Pictures Of X-Changers