Skip to end of banner
Go to start of banner

LaundryCard Hardware Identification

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 18 Next »

OVERVIEW

This page will help you determine what version hardware you have for key LaundryCard components.

TABLE OF CONTENTS

Part NumberDescriptionImagesCompatible WithStatus

X-Changer Cabinet

C-1455-A

Version 1A

Defining Features

  • The front and rear doors were inset rather then wrapped around the cabinet, removable and replaceable.
  • The graphics on the front of the cabinet were silk screened directly onto the steel.
  • Only 10 cabinets were built and shipped to customers of this version.

External

Internal

LaundryCard Software

  • ANY

DISCONTINUED

C-1455-B

Version 1B

Defining Features

  • The doors were permanently mounted and was not removable.
  • The doors were also changed so that the edges of the doors wrapped around the cabinet eliminating any pry points on the door.
  • The graphics were silk screened directly to the steel.
  • 20 cabinets were built and shipped to customers of this version.

LaundryCard Software

  • ANY

DISCONTINUED

C-1455-C

Version 1C

Defining Features

  • A 4 piece removable frame was created and mounted allowing the graphics to be applied to a clear acrylic panel.
  • The printed graphic panel could be changed and replaced at the store owners request. T
  • his version also allowed us to design a retrofit kit that would allow a LCD flat screen touch-screen to be used in replacement of the CRT monitor.

LaundryCard Software

  • ANY

DISCONTINUED

C-1480

Version 2A

Defining Features

  • New smaller dimensions
  • Single lock on each access door
  • Flat panel monitor

LaundryCard Software

  • ANY

DISCONTINUED

C-1481

Version 2B (Prepped for Cash)

Defining Features

  • New graphic acrylic
  • Component rack has been shifted right 1/2"
  • Pre-cut acrylic panel for the EMV credit card reader

External

Needs v2 cabinet picture showing MEI bezel installed.

Internal

LaundryCard Software

  • v8, v9

CURRENT

C-1482

Version 2B (Prepped for EMV)

Defining Features

  • New graphic acrylic
  • Component rack has been shifted right 1/2"
  • Pre-drilled mounting holes for the EMV credit card reader

External

shell cabinet with emv.jpg

Internal

LaundryCard Software

  • v8, v9

CURRENT

C-1470-FL

Lite (Front Load)

Defining Features

  • Smaller than V2 X-Changer
  • Computer and monitor are all in one integrated
  • Door on front of cabinet. No rear door.
  • Door can be mounted on front or rear of unit
  • No acrylic panel. Graphics applied directly to cabinet.

External

Internal

LaundryCard Software

  • v6, v7, v8

DISCONTINUED

C-1470-RL

Lite (Rear Load)

Defining Features

  • Smaller than V2 X-Changer
  • Computer and monitor are all in one integrated
  • Door on rear of cabinet. No front door.
  • Door can be mounted on front or rear of unit
  • No acrylic panel. Graphics applied directly to cabinet.

External

Internal

LaundryCard Software

  • v6, v7, v8

DISCONTINUED

Computer

C-0600-GX780Dell Optiplex GX780 SFF Computer

Cabinet

  • 1A, 1B, 1C
  • 2A

LaundryCard Software

  • v5, v6, v7, v8

DISCONTINUED

C-0600-XEDell Optiplex XE SFF Computer

Cabinet

  • 1A, 1B, 1C
  • 2A

LaundryCard Software

  • v7, v8

DISCONTINUED

C-0600-XE2Dell Optiplex XE2 SFF Computer

Cabinet

  • 1A, 1B, 1C
  • 2A, 2B

LaundryCard Software

  • v7, v8, v9

CURRENT

C-0600-XE3

Dell Optiplex XE3 SFF Computer

Cabinet

  • 1A, 1B, 1C
  • 2A, 2B

LaundryCard Software

  • v9

CURRENT

C-1020

10.4" Panel PC (VIA C7)

Defining Features

  • CPU: VIA C7

Cabinet

  • Lite

LaundryCard Software

  • v6, v7

DISCONTINUED

C-1021

10.4" Panel PC (Intel)

Defining Features

  • CPU: Intel Core Duo 1.6GHz
  • 2GB RAM
  • Mechanical Hard Drive

Cabinet

  • Lite

LaundryCard Software

  • v6, v7, v8

DISCONTINUED

C-1021R1

10.4" Touch Panel PC (Intel)

Defining Features

Same as C-1021 but has:

  • 4GB RAM (up from 2GB)
  • 128GB SSD (vs HDD)

Cabinet

  • Lite

LaundryCard Software

  • v6, v7, v8

DISCONTINUED

C-1021R2

10.4" Touch Panel PC

Defining Features

  • CPU: Intel Core i5 3320M
  • CI770C Motherboard

Cabinet

  • Lite

LaundryCard Software

  • v8, v9

CURRENT

Touch Screen (Display / Monitor)

C-1054

ELO ET1545L Touchscreen

Defining Features

  • Integrated plastic, rounded bezel

Cabinet

  • 2A, 2B

LaundryCard Software

  • v5, v6, v7

DISCONTINUED

C-1057

ELO ET1547L Touchscreen

Defining Features

  • Integrated metal, flat bezel



Cabinet

  • 2A, 2B

LaundryCard Software

  • v5, v6, v7

DISCONTINUED

C-1053

ELO ET1537L Touchscreen with no bezel

Defining Features

  • No bezel
  • Silver enclosure

X-Changer Cabinet

  • 1A, 1B, 1C

  • 2A, 2B

LaundryCard Software

  • v7, v8, v9

DISCONTINUED

C-1052

ELO ET1590L Touchscreen

Defining Features

  • No bezel
  • Black enclosure

X-Changer Cabinet

  • 1A, 1B, 1C

  • 2A, 2B

LaundryCard Software

  • v7, v8, v9

CURRENT

Ethernet Power Controller (EPC) / Power Strip 

C-0515

Version 1 EPC

X-Changer Cabinet

  • 2A, 2B

LaundryCard Software

  • N/A

DISCONTINUED

C-0515

Version 2 EPC

X-Changer Cabinet

  • 2A, 2B

LaundryCard Software

  • ANY

DISCONTINUED

C-0515

Version 3 EPC

X-Changer Cabinet

  • 2A, 2B

LaundryCard Software

  • ANY

DISCONTINUED

C-0517

Tripplite RS-0615-R Surge Protection.

Defining features:

  • Each X-Changer uses two of these units.

X-Changer Cabinet

  • 2A, 2B

LaundryCard Software

  • N/A

CURRENT

Barcode Scanner

C-1010

Welch Allyn ST3700 Barcode Scanner

X-Changer Cabinet

  • 1A, 1B, 1C
  • 2A, 2B

  • Lite

LaundryCard Software

  • ANY

DISCONTINUED

C-1024

Symbol MS4407 Barcode Scanner

X-Changer Cabinet

  • 1A, 1B, 1C
  • 2A, 2B

  • Lite

LaundryCard Software

  • v6, v7, v8, v9

DISCONTINUED

C-1023

DS457 Barcode Scanner

Defining features:

  • Branded Motorola or Zebra

X-Changer Cabinet

  • 1A, 1B, 1C
  • 2A, 2B

  • Lite

LaundryCard Software

  • v6, v7, v8, v9

CURRENT

LaundryCard Card Reader

C-0100-VC


Variation of the C-0100 LaundryCard Reader

Defining features:

  • No bezel or shroud
  • Programmed using dip switches

X-Changer Cabinet

  • 1A, 1B, 1C

LaundryCard Software

  • ANY

CURRENT

C-0100

v1 LaundryCard Reader

Defining features:

  • Same as C-0100-VC, but has a bezel
  • Programmed using dip switches

C-0100.jpg

X-Changer Cabinet

  • 2A, 2B
  • Lite

LaundryCard Software

  • ANY

DISCONTINUED

C-0101

v2 LaundryCard Reader

Defining features:

  • Programmable using the C-PROGRAM card


C-0103-B.jpg

X-Changer Cabinet

  • 2A, 2B
  • Lite

LaundryCard Software

  • ANY

DISCONTINUED

C-0102

v2.5 LaundryCard Reader

Defining features:

  • Has a serial/MLV connector on top. Not electrically functional.

C-0103-B.jpg

X-Changer Cabinet

  • 2A, 2B
  • Lite

LaundryCard Software

  • ANY

DISCONTINUED

C-0103

v3A LaundryCard Reader

Defining features:

  • Serial integration capabilities
  • Firmware memory capacity 47104 bytes.

C-0103-B.jpg

X-Changer Cabinet

  • 2A, 2B
  • Lite

LaundryCard Software

  • ANY

DISCONTINUED

C-0103-B

v3B LaundryCard Reader

Defining features:

  • Increased memory capacity to 63440 bytes

X-Changer Cabinet

  • 2A, 2B

LaundryCard Software

  • ANY

CURRENT

Bill Note Acceptor (BNA)

C-1004

MEI 2811 Bill Acceptor

Defining features:

  • Gray plastic housing
  • Up facing bill stacker

X-Changer Cabinet

  • 2A, 2B
  • Lite

LaundryCard Software

  • ANY

CURRENT

C-1002

MEI 2831 Bill Acceptor 

Defining features:

  • Gray plastic housing
  • Down facing bill stacker

X-Changer Cabinet

  • 1A, 1B, 1C

LaundryCard Software

  • ANY

CURRENT

C-1005

MEI LE 3811 DL Bill Acceptor

Defining features:

  • Black metal housing
  • Down facing bill stacker

X-Changer Cabinet

  • 1A, 1B, 1C

LaundryCard Software

  • ANY

DISCONTINUED

Reader Control Unit (Control Head / SeaLINK / Distribution Board)

C-0500R1

CCI Master Distribution Board (Requires Sealevel 8-Port Unit)

X-Changer Cabinet

  • 1A, 1B, 1C

LaundryCard Software

  • ANY

DISCONTINUED

C-1027Sealevel 4 Port SeaLINK

X-Changer Cabinet

  • 1A, 1B, 1C

LaundryCard Software

  • v5, v6, v7, v8

DISCONTINUED

C-1028Sealevel 8 Port SeaLINK

X-Changer Cabinet

  • 1A, 1B, 1C

LaundryCard Software

  • v5, v6, v7, v8

DISCONTINUED

C-0525

CCI Reader Control Head V3

X-Changer Cabinet

  • ANY

LaundryCard Software

  • ANY

CURRENT

C-0526

CCI Reader Control Head V2

Compatibility Warning

The v2 Control Head is not compatible with the Welch Allyn barcode reader.

IMG_8174a (Medium).jpg

X-Changer Cabinet

  • 2A, 2B

LaundryCard Software

  • ANY

CURRENT

LaundryCard Router Firewall (LCRF)

C-0615

Cisco PIX  501 Firewall

X-Changer Cabinet

  • ANY

LaundryCard Software

  • v5, v6, v7, v8

DISCONTINUED

C-4307

Astaro ASG-110 Firewall

X-Changer Cabinet

  • ANY

LaundryCard Software

  • v5, v6, v7, v8

DISCONTINUED

D-Link

DFL-210 Firewall

X-Changer Cabinet

  • ANY

LaundryCard Software

  • v5, v6, v7, v8

DISCONTINUED

D-Link

DFL-260 Firewall

X-Changer Cabinet

  • ANY

LaundryCard Software

  • v5, v6, v7, v8

DISCONTINUED

C-4310

Mikrotik RB750GL

X-Changer Cabinet

  • ANY

LaundryCard Software

  • v5, v6, v7, v8

DISCONTINUED

C-4311

Mikrotik hEX Lite

Defining features:

  • L2TP VPN access 

X-Changer Cabinet

  • ANY

LaundryCard Software

  • v5, v6, v7, v8

  • v9 (with specific configuration loaded)

CURRENT

Credit Card Reader

C-4305

ID Tech WCR3227-512U credit card swipe reader

X-Changer Cabinet

  • 1A, 1B, 1C

LaundryCard Software

  • v6, v7, v8, v9

CURRENT

C-1004B

MEI AE2811-U10E Credit card combo bezel

Compatibility Warning

Store must have their gateway assigned as AuthorizeNet.

X-Changer Cabinet

  • 2A, 2B
  • Lite

LaundryCard Software

  • v6, v7, v8, v9

CURRENT

C-1008

Ingenico iUC285 EMV Combo credit card reader

EMV Compatibility Warning

Store must have their gateway assigned as Datacap.

X-Changer Cabinet

  • 1A, 1B, 1C
  • 2A, 2B

LaundryCard Software

  • v9

CURRENT

  • No labels