Skip to end of banner
Go to start of banner

Alliance ACA Configuration

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

On this Page

Overview

This page documents ACA specific configuration notes.

Serial Configuration Requirements

ACA machines using a serial configuration require dip switch 3 on the Machine Control Board to be set to the 'ON' position. Leave all other dip switches as is.

Pulse Configuration Requirements

ACA Card Ready machines using a pulse configuration require a retrofit to a Coin-Ready state. This may require obtaining an additional Coin Sense Harness from Alliance.

 

  • No labels