Skip to end of banner
Go to start of banner

Alliance Galaxy 600 Washer-Extractors

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Overview

The Galaxy 600 control is available exclusively on Alliance Huebsch washer-extractors

Images

Galaxy 600 WasherGalaxy 600 Control

Model Numbers

  • HCN020
  • HCN030
  • HCN040
  • HCN060
  • HCN080

Special Notes

  • For older Galaxy 600 controls, a special jumper may be required to be plugged in to the machine control board in order to tell the control to operate in 'Card' mode. This jumper is provided by CCI part number C-0110-CP.
  • For current Galaxy 600 controls, the machine control board will have one of two isolated methods for enabling 'Card' mode:
    • A dipswitch panel. To enable 'Card' mode, dipswitch 3 would have to be turned ON. Leave all other dipswitches in their original positions.
      • This is not to be confused for the communication board, which may also have a dipswitch panel.
    • No dipswitch panel present. Enabling 'Card' mode would, thus, need to be set up in machine programming directly.

Functionality

The following list describes the functionality that CCI FasCard reader has with control:

  • Cycle-based pricing

    • The Galaxy 600 has 6 cycle options. FasCard can charge unique price for each cycle.
      • Normal Hot
      • Normal Warm
      • Normal Cold
      • Blankets Cold
      • Delicate Warm
      • Delicate Cold
  • Cycle modifier pricing

    • The Galaxy 600 has 2 cycle modifiers: Extra Wash and Extra Rinse. FasCard can up-charge the vend price when user selects one or both of these options.
      • Extra Wash
      • Extra Rinse
  • Cycle Configuration

    • The ability to enable, disable, or adjust the following options:
      • Audio Signals 
        • Keypress
        • End of Cycle
        • Coin Drop
        • Serial/Network Vend
        • Start Pad
      • Extra Wash Modifier Options (Key 1)
        • Prewash
        • Extra Rinse
        • Add. Wash Time
          • Add. Wash Time Minutes Dropdown (0-15)
        • Warm Final Rinse
      • Extra Wash Modifier Options (Key 2)
        • Prewash
        • Extra Rinse
        • Add. Wash Time
          • Add. Wash Time Minutes Dropdown (0-15)
        • Warm Final Rinse
      • Default Cycle/Temp
        • Normal/Hot
        • Normal/Warm
        • Normal/Cold
        • Blankets/Cold
        • Delicate/Warm
        • Delicate/Cold
      • Default Cycle Modifiers
        • None 
        • Extra Wash
        • Extra Rinse
        • Extra Wash and Extra Rinse

Screenshots

Cycle Configuration Interface - Equipment Setup

Pricing Interface - Pricing/Schedule Setup



Additional Resources

  • No labels