0471 LaundryCard Reader Install Guide

Install Mounting Hardware

 I-M0032

Part #: C-0015

Desc 1: Label

Desc 2: Reader Cover Label

   Qty: 1

Part #: C-0141

Desc 1: Screw

Desc 2: 8-32 x 1-1/2" - Cap

   Qty: 2

Part #: C-0934

Desc 1: Mounting Bracket

Desc 2: 7" Straight

   Qty: 1

Part #: C-1059

Desc 1: Nut

Desc 2: 10-32 - Kep

   Qty: 2

1. Remove existing coin box and coin drop.

2. Attach the C-5414 Standard Mounting Bracket to the C-0934 Mounting Bracket using the C-5702 Chase Nipple and C-5703 Nut.

3. Install the C-0934 Mounting Bracket into the coin vault opening. Secure in place using the C-1059 Kep Nuts.

Connect Machine Interface Harness

 I-T0076

Part #: C-0126-MLV

Desc 1: Machine Start Harness

Desc 2: Wascomat Compass

   Qty: 1

Part #: C-0126-MLV-EXT15

Desc 1: Extension Harness

Desc 2: Compass

   Qty: 1

Part #: C-5359

Desc 1: Machine Start Harness

Desc 2: Compass

   Qty: 1

1. Connect the C-0126-MLV Machine Start Harness to the RS232 connection on the Machine Control Assembly.

   1. If needed attach the C-0126-MLV-EXT15 Extension Harness to lengthen the C-0126-MLV Machine Start Harness.

2. Connect the C-5359 Machine Start Harness to the Input connection on the Machine Control Assembly.

Connect and Mount Reader

1. Feed remaining harness ends through mounting bracket.

2. Connect the free end of the C-0126-MLV Machine Start Harness to port 1 (Serial Connection Port) as shown in the image above.

3. Connect the free end of the C-5359 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.

4. Connect the the Cat5 cables running to and from the adjacent machines to ports labeled 3 (Line Connection Ports) as shown in the image above.

5. Secure the LaundryCard reader to the bracket using included hardware.

Machine Configuration

TODO