Skip to end of banner
Go to start of banner

3618 Reader Install Guide

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 16 Current »

Warning!

This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses.

It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.

Overview

Equipment Details

Type: Washer Extractor
Manufacturer: Dexter
Make: Dexter
Model Length: Not Set

Will not show mounting kits unless payment device setup is specified. Model number on the machine will not include this. For coin prepped models the number will end in US. For Easy Card prepped models, they will end in EC.

Associated Models


WCAD18KCB12CN
WCAD18KCS10
WCAD18KCS10EC
WCAD18KCS10ECUS
WCAD18KCS10US
WCAD18KCS10USA
WCAD18KCS12
WCAD18KCS12000
WCAD18KCS12CN
WCAD18KCS12EC
WCAD18KCS12EC1X
WCAD18KCS12ECSZ
WCAD18KCS12SZ
WCAD18KCS12US
WCAD18KCS12USA
WCAD18KCS13EC
WCAD20KCB10CN
WCAD20KCB10US
WCAD20KCB10USA
WCAD20KCB10USWCAD
WCAD20KCB12CN
WCAD20KCB12CNSZ
WCAD20KCB12ECSZ
WCAD20KCB12US
WCAD20KCB12USS2
WCAD20KCB12USSZ
WCAD20KCS10
WCAD20KCS10EC
WCAD20KCS10US
WCAD20KCS12
WCAD20KCS12EC
WCAD20KCS12ECSZ
WCAD20KCS12EX
WCAD20KCS12US
WCAD20KCS12USSZ
WCAD20KCX10CN
WCAD20KCX10US
WCAD20KCX12CN
WCAD20KCX12US
WCAD20KCX12USSZ
WCAD25KCS12
WCAD25KCS12EC
WCAD25KCS12EC2X55BC5U
WCAD25KCS12SZ
WCAD25KCS12US
WCAD25KCS12USX
WCAD30KCB12BN
WCAD30KCB12CN
WCAD30KCB12CNSZ
WCAD30KCB12CNSZSSBCSUSA
WCAD30KCB12ECSZ
WCAD30KCB12US
WCAD30KCB12USA
WCAD30KCB12USSZ
WCAD30KCS12
WCAD30KCS12ECSZ
WCAD30KCS12SZ
WCAD30KCS12US
WCAD30KCS12USSZ
WCAD30KCX12CN
WCAD30KCX12CNSZ
WCAD30KCX12US
WCAD30KCX12USSX
WCAD30KCX12USSZ
WCAD40KCB12CN
WCAD40KCB12US
WCAD40KCB12USSZ
WCAD40KCS12
WCAD40KCS12CP
WCAD40KCS12EC
WCAD40KCS12US
WCAD40KCS17
WCAD40KCX12CN
WCAD40KCX12US
WCAD50KCB12CNSZ
WCAD50KCB12ECSZ
WCAD50KCB12USA
WCAD50KCB12USSZ
WCAD50KCS12ECSZ
WCAD50KCS12FZ
WCAD50KCS12SZ
WCAD50KCS12USSZ
WCAD50KCX12USSZ
WCAD55KCS12
WCAD55KCS12CP
WCAD55KCS12ECSZ
WCAD55KCS12US
WCAD55KCX12
WCAD60KCB12
WCAD60KCB12CN
WCAD60KCB12CNSZ
WCAD60KCB12CNSZSSBCSUSA
WCAD60KCB12NC
WCAD60KCB12US
WCAD60KCB12USA
WCAD60KCB12USSX
WCAD60KCB12USSZ
WCAD60KCS12
WCAD60KCS12CN
WCAD60KCS12EC
WCAD60KCS12US
WCAD60KCX12CN
WCAD60KCX12CNFZ
WCAD60KCX12US
WCAD60KCX12USSZ
WCAD75KCB12US
WCAD75KCS12
WCAD75KCS12EC
WCAD75KCS12US
WCAD80KCB12
WCAD80KCB12CN
WCAD80KCB12ECSZ
WCAD80KCB12U
WCAD80KCB12US
WCAD80KCB12USA
WCAD80KCB12USSZ
WCAD80KCS12
WCAD80KCS1200
WCAD80KCS12EC
WCAD80KCS12US
WCAD80KCS12USSZ
WCAD80KCX12CN
WCAD80KCX12US
WCAD80KCX12USA
WCAD90KCB12CNSZ
WCAD90KCB12USSZ
WCAD90KCS12ECSZ
WCAD90KCX12CNSZ

Recommended Tools and Supplies

  • Drill

  • 1 1/8" Tungsten Carbide Tipped Hole Cutter

  • Cutting Oil

  • 9/64" Drill Bit

  • Center Punch

  • Hammer

  • Fine Point Permanent Marker

  • Pliers

  • Tape Measure

Installation

Install Mounting Hardware

Connect Power

Connect Coin Sense Harness

Connect Machine Interface Harness

Connect and Mount Reader

Machine Configuration

No special configuration required.

CCI Software Configuration

Machine ControlPulseSerial
A-Series (1.0)SingleVend (Relay) / 55ms*NOT SUPPORTED*

Additional Resources

  • No labels