/
2032 F1 Reader Install Guide

2032 F1 Reader Install Guide

Owned by David Bussman
Last updated: Jan 23, 2024 by Chris Kite
2 min read

Install Mounting Hardware

Connect Power

Connect Coin Sense Harness

Connect Machine Interface Harness

Connect and Mount Reader

  1. Feed the remaining harness ends through the mounting hole.

  2. (Dryer Pocket) Connect the free end of the C-5254 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.

  3. (Washer Pocket) Connect the free end of the C-0127-MLV Machine Start Harness to port 1 (Serial Connection Port) as shown in the image above.

  4. (Coin and Card Installation Only) Connect the free end of the C-5258 Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.

  5. Connect the free end of the C-5500-115 Power Extension Harness to port 4 (Power Harness Connection Port) as shown in the image above.