Warning!
This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses.
It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks.
Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.
Overview
This upgrade guide goes over the detailed steps needed to upgrade from First Generation (F1) FasCard readers to Third Generation (F3/F3a/F3e) FasCard readers.
The below solutions are not compatible with previous generation High-Front or Top-Mount readers or past mounting bases.
The various instructions provided layout steps for existing equipment. For new installs, please refer to one of the various install guides included with the system or equipment order per machine model.
Required Base Parts
| Part ID | Description | Image |
|---|---|---|
| C-5400 | V2 Coin Sense Adapter F1 to F2 card reader
|
|
| C-5520 | F3 FasCard Reader EMV Compliant Coins, Credit/Debit, Loyalty | |
| C-6801 | F2/F3 Reader Mounting Kit Universal
|
|
Recommended Tools
2.5 (8-32) hex bit (or screwdriver with a 2.5 (8-32) hex tip).
T15 Secure Torx bit (or screwdriver with a T15 Secure Torx tip).
Also recommend a flex extension to accommodate for any tight angles/spacing if using any type of bit driver.
For existing Top-Mount solutions:
Large pliers (e.g. Straight Jaw or Hex Jaw Pliers) or an adjustable wrench.
May need two, in some cases.
Installation Methods
Below are methods of installation based on where on a machine a reader may be placed. Click or tap the specific method of choice to expand required instructions to continue.