Skip to end of banner
Go to start of banner

_603

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

 I-T0012

Part #: C-0110-TOP

Desc 1: Machine Start Harness

Desc 2: 36" - Alliance Pre-ACA

   Qty: 1

Part #: C-0110-CP

Desc 1: Jumper Plug

Desc 2: Enables card mode on pre-ACA

   Qty: 1

Pulse Setup

  1. Connect the C-0110-TOP Machine Start Harness to the H5 connection on the Machine Control Assembly.

  2. C-0110-CP Jumper Plug is not used, but can be retained in case of future serial communication usage usage.

Serial Setup

  1. Connect the C-0110-TOP Machine Start Harness to the H5 connection on the Machine Control Assembly.

  2. Connect the C-0110-CP Jumper Plug to the H2 connection on the Machine Control Assembly.

Connect Machine Interface Harness

 I-T0012

Part #: C-0110-TOP

Desc 1: Machine Start Harness

Desc 2: 36" - Alliance Pre-ACA

   Qty: 1

Part #: C-0110-CP

Desc 1: Jumper Plug

Desc 2: Enables card mode on pre-ACA

   Qty: 1

  1. Connect the C-0110-TOP Machine Start Harness to the H3 connection on the Machine Control Assembly.

Machine Configuration

If using serial configuration, install the C-0110-CP Jumper Plug in the H6 connection on the Machine Control Assembly to put the machine into card mode.

  • No labels