Page Comparison

Custom Install Scenario

This install guide has been created and intended only for use at FasCard account F0913, where a previous card system is being replaced.

C-5358 coin sense harness is being sent in place of the standard coin sense harness as the previous card system spliced into the coin drop harness.

1. Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.

2. Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.

3. Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

1. Disconnect the Coin Drop from the previous card reader.

2. Connect the C-5358 Coin Sense Harness to the harness connected to the Coin Drop.

   1. Connect the White wire from the coin drop to the White wire terminal on C-5358.

   2. Connect the Green wire from the coin drop to the Green wire terminal on C-5358.

   3. Connect the Brown wire from the coin drop to the Brown wire terminal on C-5358.