0471 F1 Reader Install Guide - Custom Install 01

Custom Install Scenario

This install guide has been created and intended only for use at FasCard account F0913, where a previous card system is being replaced.

C-5358 coin sense harness is being sent in place of the standard coin sense harness as the previous card system spliced into the coin drop harness.

I-M0142

Part #: C-5800

Desc 1: F1 Reader Mounting Kit

Desc 2: Universal

Qty: 1

Place the C-5700-TEMP Drill Template on the desired mounting location.
Verify included harnesses will reach desired location without encountering interference from internal machine components.
Refer to FasCard Mounting Guide for further instructions.

I-P0003

Part #: C-5101

Desc 1: Spade Taps

Desc 2: 18-14 AWG

Qty: 3

Part #: C-5210

Desc 1: Power Adapter Harness

Desc 2: CGI

Qty: 1

Part #: C-5500

Desc 1: Power Extension Harness

Desc 2: 25.5"

Qty: 1

Part #: C-5602R1

Desc 1: Power Converter

Desc 2: SMT-012-018VW

Qty: 1

Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.
Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.
Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

I-S0017

Part #: C-5358

Desc 1: Coin Sense Harness (SA)

Desc 2: TD

Qty: 1

Disconnect the Coin Drop from the previous card reader.
Connect the C-5358 Coin Sense Harness to the harness connected to the Coin Drop.
1. Connect the White wire from the coin drop to the White wire terminal on C-5358.
2. Connect the Green wire from the coin drop to the Green wire terminal on C-5358.
3. Connect the Brown wire from the coin drop to the Brown wire terminal on C-5358.