Connect the bare wire ends of the C-0111-5353R1RES Machine Start Harness to the Coin 1 connector on the Machine Control Assemblyterminal block. Terminal block connections are numbered 0-6 from the edge nearest the top of the board (position 0) to the bottom of the terminal block (position 6) For machines shipped before 1/1/2006, connect harness to positions 1 and 3. For machines shipped after 1/1/2006, connect harness to positions 3 and 5. For machines shipped near 6/1/2007, connect harness to positions 2 and 3. All other machines, connect harness to positions 3 and 4.
|