| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
|
Overview
This document addresses
using the Wifi Setup page within Manager’s Options to add CCI Access Points (
CAPs) for use in an environment utilizing
wireless LaundryCard Readers.
| title | IMPORTANT |
|---|
The information in this document is specifically provided for the use of Wireless LaundryCard Readers and LaundryCard Access Point (LCAP) wireless hubs.
This is a future product. All information subject to change. Do not discuss nor disseminate information unless OK'd by Steve Marcionetti in advance.
INTERNAL USE ONLY.
On this page
| Table of Contents |
|---|
Introduction
LaundryCard systems can be installed with (but not limited to) one of two types of readers:
Traditional LaundryCard Readers
Wireless LaundryCard Readers
While assigning equipment to its respective reader using Card Reader Setup (Equipment/Machine Setup) may be a similar process,
wireless LaundryCard Readers have
additional
requirements:
C-0527 Wireless Control Head | C-4491 CCI Access Point ( |
|---|
<<Placeholder for final image of LCAP when ready; possibly even table using a Businessworks Macro pending production component; Part ID assignment>>
Similar to a FasCard Satellite Access Point (SAP), a LaundryCard Access Point (LCAP) is theCAP) | |
|---|---|
 |  |
A Wireless Control Head
A configured wireless CCI Access Point (CAP).
A CCI Access Point (CAP) serves as a broadcasting hub for all wireless
readers in a single location. When paired with the X-Changers using a wireless control head or an individual Power over Ethernet (PoE) injector, CAPs bridge the communication between wireless LaundryCard readers and the LaundryCard system.
Wireless readers in a LaundryCard system can be set up for a number of specific use cases such as:
A location that utilizes multiple rooms or concentrated sections/corners that a Control Head-established line cannot easily access.
An established location where new equipment is being added without adding an additional Control Head or adding/extending hardline(s).
A new location looking to either:
Blend both wired and wireless solutions, whether in part, evenly, or as a majority.
Have a 100% wireless solution for LaundryCard.
For
a CAP to be used in a location, it must be added to the system using the Wifi Setup menu.
Wifi Setup
A LaundryCard system can have up to four (4)
unique CAPs configured in a single location.
The
CAPs themselves are registered and configured within the internal LaundryCard infrastructure of the store and only report to the X-Changers directly.
Each
CAP in Wifi Setup requires only the MAC Address to be standard; there are no physical naming / notes restrictions.
Adding
CAPs in Wifi Setup
You can only add one unique CAP MAC Address per ID. Any attempt to add more than one unique CAP MAC will produce a duplicate MAC address error.
Under Manager's Options, select Setup → Wifi Setup
To the right of the chosen ID row, select Edit
Fill in the Name and Notes column fields of the
CAP ID in question.
Retrieve and enter the MAC Address field from the
CAP itself (typically labeled as E01 - XX:XX:XX:XX:XX:XX).
For the Wifi Frequency column, select between one of the three (3) available channels (1, 6, 11) in the dropdown.
Select Save