Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Table of Contents
maxLevel2
minLevel2

Overview

...

MultiExcerptNameOverview

...

Install Header

...

MultiExcerptNameInstall Header

...

This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses. It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.

Required Hardware

Card Reader

150C-0103-Btruetruetrue

LC Tools

...

LC Tools

Excerpt
nameLC Tools

Warnings

MultiExcerptName
Multiexcerpt
  • Various Cat5 cables

    • If terminating cables, include Cat5 RJ-45 stripper/crimper

  • Cat5/RJ-45 line tester

  • 3/32 allen key (card reader screws)

  • Philips Screwdriver w/ multiple bits

  • Flathead Screwdriver

  • Standard socket set

  • Utility Knife

  • Cable/Zip Ties

Ports

...

MultiExcerptNameports
mediumwarning

Confirm machine power is disconnected before beginning installation!

mediumwarning

Use caution and appropriate protection to prevent hand and eye injury during installation!

warnings

Additional Information

Multiexcerptexcerpt
MultiExcerptNamenameAdditional Information

Additional Information

Unverified

Multiexcerpt
MultiExcerptNameUnverified
largewarningThese instructions and kit hardware have not been verified or tested by Card Concepts Inc. and are used at the installers own risk.