Overview
This document is intended to guide the user through installation utilizing the kit numbered according to the document title. A list of associated equipment models including control information and additional installation notes can be found below. This guide further assumes that all relevant Cat5 cables have been run to the point of connection for the LaundryCard reader being installed. Further information regarding cabling and mounting can be found in the LaundryCard Kit Installation Guidelines.
Install Header
LaundryCard Reader V3 - RevB Multi-Vend / Bootloader
Required Hardware
Card Reader
Part ID Description Image C-0103-B
LC Tools
- Various Cat5 cables
- If terminating cables, include Cat5 RJ-45 stripper/crimper
- Cat5/RJ-45 line tester
- 3/32 allen key (card reader screws)
- Philips Screwdriver w/ multiple bits
- Flathead Screwdriver
- Standard socket set
- Utility Knife
- Cable/Zip Ties
Ports
|
|
Warnings
Additional Information
Additional Information