Versions Compared

Old Version 5

changes.mady.by.user CCI Integration User

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Place theC-5700-TEMPDrill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.
    cci-readerinstall-kitstep
    KitID917
    KitDescCoin and Card
    componentMounting

  • Remove the mounting bolt securing the coin drop to the metercase. Then remove the coin drop and coin box.

    • Run reader harnesses through the metercase and the hole on the C-5771Metercase Bracket.Install C-5771Metercase Bracketinto the metercase and secure using C-0301 Mounting Bolt.
    cci-readerinstall-kit
    KitID828
    KitDescCard Only - Coin Model

    ...

    step
    componentPower

    Locate the incoming power cables in the rear of the machine. This should include a white, black and green wire.
    Use the C-5101 Spade Tapsto tap the black (L1) and white (Neutral) wires.
    Attach the spade ends of the C-5336 Power Adapter Harnessto the taps. Blue to black, and Brown to White.
    Attach the Green ground wire from the C-5336 Power Adapter Harnessto a nearby chassis ground screw.
    Connect the 3-pin connector from the C-5336 Power Adapter Harness to the 3-pin connector on the C-5602R1 Power Converter.
    Connect the 4-pin connector from the C-5602R1 Power Converter to the 4-pin connector on the C-5500Power Extension Harness.
    Mount the C-5602R1Power Converterin the machine by using zip ties to secure it to the machine's wire harness.
    cci-readerinstall-kit
    KitID663
    KitDescTap Machine Power

    ...

    step
    componentCoin Sense

  • Disconnect the Coin Drop from the Machine Control Assembly.
    • Connect theC-5362 Coin Sense Harness to the harness connected to the Coin Drop.
    cci-readerinstall-kitstep
    KitIDcomponent693
    KitDescFactory - Optical Coin Drop

    ...

    Start

    Cci readerinstall step
    componentExtras

    Connect theC-5364Machine Start Harness to theAA3 connector on the Machine Control Assembly.
    cci-readerinstall-kit
    KitID590
    KitDescPulse - AA3 / Debit Connection

    Connect and Mount Reader

    ...

    step
    componentReader

    Machine Configuration

    1. Enter Service Mode and navigate to J option.

    2. Set option to J.d.

    3. Exit Service Mode.

    Cci readerinstall footer