| Warning |
|---|
Custom Install Scenario This install guide has been created and intended only for use at FasCard account F0913, where a previous card system is being replaced. C-5358 coin sense harness is being sent in place of the standard coin sense harness as the previous card system spliced into the coin drop harness. |
Install Mounting Hardware
...
| KitID | 917 |
|---|
| KitDesc | Coin and Card |
|---|
...
Place the C-5700-TEMP Drill Template on the desired mounting location.
...
Verify included harnesses will reach desired location without encountering interference from internal machine components.
...
| cci-readerinstall-kitstep |
|---|
| Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.
Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.
...
| Cci readerinstall kit |
|---|
| KitID | 690 |
|---|
| KitDesc | Coin Drop: Factory |
|---|
|
Disconnect the Coin Drop from the previous card reader. Connect the C-5358 Coin Sense Harness to the harness connected to the Coin Drop. Connect the White wire from the coin drop to the White wire terminal on C-5358. Connect the Green wire from the coin drop to the Green wire terminal on C-5358. Connect the Brown wire from the coin drop to the Brown wire terminal on C-5358.
|