Page Comparison

...

1. Enter the machine's System Menu and set the following settings (See machine programming manual for more info.)

   1. Machine Settings

      1. Liquid Soap Supply: Enabled

   2. Payment Settings:

      1. Enable Types: Disable all payment types

      2. Coin Options: Single

      3. Coin 1 Value: Intended Vend Price

      4. Coin 2 Value: Intended Vend Price

      5. Serial Payment System: Disabled

2. On the FasCard Admin site, create a SingleVend equipment type with the following settings:

   1. Mode: Simple

   2. Pulse Length: 1000

   3. Pulse Interval: 250

   4. Pulse Type: Relay

   5. Sensor Input: Required Off

   6. Show Remaining Time: Disabled

   7. Cycle Time: 600 Seconds

   8. # Pulses: 1