3638 Reader Install Guide

ERROR: Unable to connect to 'InstallRef' database.

Source: Microsoft OLE DB Driver for SQL Server
Number: -2147467259
Description: Cannot open database "CCI_InstallRef" requested by the login. The login failed.

I-S0018

Part #: C-5360

Desc 1: Coin Sense Harness

Desc 2: Female taps, Rq. Male

Qty: 1

Disconnect the terminal quick connects from the terminal block mounted on top of the coin vault.
1. Mark the outer green and red quick connects for later use if using C-5265 Machine Start Harness.
Connect the C-5360 Coin Sense Harness to the terminal block tabs. Match each connection by color of the coin sensor wires.

I-S0046

Part #: C-6360

Desc 1: Coin Sense Harness

Desc 2: Female taps, Rq. Male

Qty: 1

Disconnect the terminal quick connects from the terminal block mounted on top of the coin vault.
1. Mark the outer green and red quick connects for later use if using C-5265 Machine Start Harness.
Connect the C-6360 Coin Sense Harness to the terminal block tabs. Match each connection by color of the coin sensor wires.

ERROR: Unable to connect to 'InstallRef' database.

Source: Microsoft OLE DB Driver for SQL Server
Number: -2147467259
Description: Cannot open database "CCI_InstallRef" requested by the login. The login failed.

Machine Configuration

Singlevend - Coin Pulse

Enter the machine's System Menu and set the following settings (See machine programming manual for more info.)
1. Machine Settings
  1. Liquid Soap Supply: Enabled
2. Payment Settings:
  1. Enable Types: Disable all payment types
  2. Coin Options: Single
  3. Coin 1 Value: Intended Vend Price
  4. Coin 2 Value: Intended Vend Price
  5. Serial Payment System: Disabled
On the FasCard Admin site, create a SingleVend equipment type with the following settings:
1. Mode: Simple
2. Pulse Length: 1000
3. Pulse Interval: 250
4. Pulse Type: Relay
5. Sensor Input: Required Off
6. Show Remaining Time: Disabled
7. Cycle Time: 600 Seconds
8. # Pulses: 1