Skip to end of banner
Go to start of banner

_LC Reader Installation

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 47 Next »

Overview

This document is intended to guide the user through installation utilizing the kit numbered according to the document title. A list of associated equipment models including control information and additional installation notes can be found below. This guide further assumes that all relevant Cat5 cables have been run to the point of connection for the LaundryCard reader being installed. Further information regarding cabling and mounting can be found in the LaundryCard Kit Installation Guidelines.

Install Header

Required Hardware

Card Reader

Part IDDescriptionImage
C-0103-B

LaundryCard Reader V3 - RevB

Multi-Vend / Bootloader

LC Tools

  • Various Cat5 cables
    • If terminating cables, include Cat5 RJ-45 stripper/crimper
  • Cat5/RJ-45 line tester
  • 3/32 allen key (card reader screws)
  • Philips Screwdriver w/ multiple bits
  • Flathead Screwdriver
  • Standard socket set
  • Utility Knife
  • Cable/Zip Ties

Ports

LaundryCard Reader Ports

Warnings

Additional Information

Additional Information

Unverified

  • No labels