Skip to end of banner
Go to start of banner

Wifi Setup

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Table of Contents

Overview

This document addresses the adding and removal of LaundryCard Access Points (LCAPs) for use in an environment utilizing Wireless LaundryCard Readers.

IMPORTANT

The information in this document is specifically provided for the use of Wireless LaundryCard Readers, Wireless Control Heads and Wireless LaundryCard Access Point (LCAP) hubs. 

This is a future product. All information subject to change. Do not discuss nor disseminate information unless OK'd by Steve Marcionetti in advance.

INTERNAL USE ONLY.

This notice will be removed when Wireless LaundryCard Readers reach a public production state.

Introduction

LaundryCard systems can be installed with (but not limited to) one of two types of readers:

  • Traditional LaundryCard Readers
  • Wireless LaundryCard Readers

While assigning equipment to its respective reader using Card Reader Setup (Equipment/Machine Setup) may be a similar process, Wireless LaundryCard Readers have additional requirements:

C-0527 Wireless Control HeadWireless LaundryCard Access Point (LCAP)
<<Placeholder for final image of LCAP when ready;
possibly even table using a Businessworks Macro
pending production component;
Part ID assignment>>
  • A Wireless Control Head
  • A configured Wireless LaundryCard Access Point (LCAP).

Similar to a FasCard Satellite Access Point (SAP), a Wireless LaundryCard Access Point (LCAP) is the broadcasting hub for all wireless LaundryCard readers in a single location.

Wireless readers in a LaundryCard system can be set up for a number of specific use cases such as:

  • A location that utilizes multiple rooms or concentrated sections/corners that a Control Head-established line cannot easily access.
  • An established location where new equipment is being added without adding an additional Control Head or adding/extending hardline(s).
  • A new location looking to either:
    • Blend both wired and wireless solutions, whether in part, evenly, or as a majority.
    • Have a 100% wireless solution for LaundryCard.

For an LCAP to be used in a location, it must be added to the system using the Wifi Setup menu.

Wifi Setup

A LaundryCard system can have up to four (4) LCAPs configured in a single location.

The LCAPs themselves are registered and configured within the internal LaundryCard infrastructure of the store and only report to the X-Changers directly.

Each LCAP in Wifi Setup requires only the MAC Address to be standard; there are no physical naming / notes restrictions.


Adding LCAPs in Wifi Setup

  1. Under Manager's Options, select Setup → Wifi Setup


  2. To the right of the chosen ID row, select Edit


  3. Fill in the Name and Notes column fields of the LCAP ID in question.


  4. Retrieve and enter the MAC Address field from the LCAP itself (typically labeled as E01 - XX:XX:XX:XX:XX:XX).

  5. Select Save


  • No labels