Skip to end of banner
Go to start of banner

F2: FasCard Reader with Stack Add-On Configuration

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

On this Page

Overview

This page is intended to guide the user through the multiple steps required to properly install and configure a FasCard F2 reader with a Stack Add-On expansion kit.

Step 1 - Configure Equipment Type

  1. Login to the the FasCard Admin site and navigate to the Equipment Setup page.
  2. Create the appropriate equipment type. Refer to FasCard Admin Site - Equipment Setup for step by step instructions on creating an equipment type as well as field definitions.
    1. Ensure the Coin Input option is set correctly.
      1. Dual Separate indicates two coin drops that allow different denominations are being utilized.
      2. Dual Combined indicates that two coin drops accepting only the same denomination are being utilized.

Step 2 - Add Machine Details

  1. Navigate to the Machines page of the FasCard Admin site.
  2. Add a new machine. Refer to FasCard Admin Site - Machine Setup page for step by step instructions on adding a new machine as well as field definitions.
  3. Refer to the FasCard Admin Site - Machine Setup

Step 3 -

No parts found

  1. Step 3 part 1

Step 4 -

No parts found

  1. Step 4 part 1.

Step 5 -

No parts found

  1. Step 5 part 1.

  • No labels