Skip to end of banner
Go to start of banner

_946

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

 I-M0157

Part #: C-0144

Desc 1: Screw

Desc 2: 8-32 x 2" - Flat

   Qty: 2

Part #: C-0930

Desc 1: Mounting Bracket

Desc 2: Unimac/ADC

   Qty: 1

Part #: C-6701

Desc 1: Adapter Plate

Desc 2: F1 to F2

   Qty: 1

Part #: C-0906

Desc 1: Spacer Plate

Desc 2: 5 1/2" x 4 3/8"

   Qty: 1

Part #: C-5801

Desc 1: F1 Reader Mounting Kit

Desc 2: Front

   Qty: 1

  1. Remove existing coin drop.

  2. Place C-6701 Adapter Plate over C-5702 Chase Nipple (Fig. 1).

  3. Place C-0906 Cover Plate over C-6701 Adapter Plate so that the outer set of holes align (Fig 2).

  4. Place C-5700 Mounting Bracket over C-6701 Adapter Plate so that the outer set of holes are not covered. Secure all parts together using the C-5703 Nut (Fig 3).

  5. Place the C-0930 Mounting Bracket behind the machine panel's coin drop opening, and the previously assembled bracket on the front side. Secure and tighten into place using the C-0144 screws (Fig 4).

  • No labels