3580 Reader Install Guide

Install Mounting Hardware

Connect Power

Connect Coin Sense Harness

Connect Machine Interface Harness

Machine Configuration

ACA Controls

1. Locate the dip switch on the back of the machine's control board.

2. Set dip switch 3 to the ON position. 

3. Leave all other dip switches as is.

Titanium Controls

1. Enter Manual Mode by opening the service door and closing the coin vault switch. Then press the following two buttons based on the control:

   Quantum Gold Pro (T4)	Galaxy 600 Pro (T2)	MDC II (T1)
   High Temp & Med Temp	High Temp & Med Temp	High Temp & Med Temp

2. rAPid will be displayed on the control. Select the Prog option and then configure the following settings:

   1. Serial Payment Configuration (SErPAY): Card

   2. Card Enable (CArdEn): On

3. Exit Manual Mode.