Skip to end of banner
Go to start of banner

3652 Reader Install Guide

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

Warning!

This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses.

It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.

Overview

Equipment Details

Type: Washer
Manufacturer: ONNERA Group
Make: [VARIES]
Model Length: 10

Associated Models


DHU100CHWTOUCHII
DHU25HWTOUCHII
DHU40HWTOUCHII
DHU65HWTOUCHII
DHU80CHWTOUCHII
DLU100CHW
DLU135HW
DLU135HWTOUCHII
DLU25TPSHW
DLU30HWTOUCHII
DLU40HW
DLU40HWTOUCHII
DLU40TPSHW
DLU50HWTOUCHII
DLU60TPSHW
DLU65HW
DLU80CHWTOUCHII
FWH80TP2HW
FWS25TP2HW
FWS30TP2HW
FWS40TP2HW
FWS60TP2HW
FWS80TP2HW

Recommended Tools and Supplies

  • Drill

  • 1 1/8" Tungsten Carbide Tipped Hole Cutter

  • Cutting Oil

  • 9/64" Drill Bit

  • Center Punch

  • Hammer

  • Fine Point Permanent Marker

  • Pliers

  • Tape Measure

Installation

Install Mounting Hardware

Connect Power

Connect Coin Sense Harness

Connect Machine Interface Harness

Connect and Mount Reader

  • No labels