Skip to end of banner
Go to start of banner

3602 Reader Install Guide

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Warning!

This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses.

It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.

Overview

Equipment Details

Type: Washer Extractor
Manufacturer: Alliance
Make: [VARIES]
Model Length: 18

Associated Models


HCT020VCAVXB60BA00
HCT020VL0VXB60B000
HCT020VP0VXB60BA00
HCT020VX0VXB60BA00
HCT020VY0FXB60BA00
HCT020VY0VXB60BA00
HCT030VCAVXB60BA00
HCT030VY0VXB60BA00
HCT040VCAFXB60BA00
HCT040VCAVXB60BA00
HCT040VL0VXB60B000
HCT040VP0VXB60BA00
HCT040VY0FXB60BA00
HCT040VY0VXB60BA00
HCT060VCAFXB60BA00
HCT060VCAVXB60BA00
HCT060VL0VXB60B000
HCT060VP0VXB60BA00
HCT060VY0FXB60BA00
HCT060VY0VXB60BA00
HCT080VCAFXB60BA00
HCT080VCAVXB60BA00
HCT080VL0VXB60B000
HCT080VP0VXB60BA00
HCT080VY0FXB600000
HCT080VY0FXB60BA00
HCT080VY0VXB60BA00
HCT100VCAVXB60BA00
HCT100VX0VXB60BA00
HCT100VY0VXB60BA00
SCT020VCAFBB60BA00
SCT020VCAFXB60B000
SCT020VCAVBB60BA00
SCT020VCAVXB500000
SCT020VCAVXB600000
SCT020VCAVXB60BA00
SCT020VDAVXB500000
SCT020VY0FXB60B000
SCT020VY0FXB60BA00
SCT020VY0VBB60BA00
SCT020VY0VXB500000
SCT020VY0VXB60BA00
SCT030VCAFBB60BA00
SCT030VCAFXB60B000
SCT030VCAFXB60BA00
SCT030VCAVXB500000
SCT030VCAVXB600000
SCT030VCAVXB60BA00
SCT030VY0FXB60B000
SCT030VY0FXB60BA00
SCT030VY0VXB500000
SCT030VY0VXB60BA00
SCT040VCAFXB60B000
SCT040VCAFXB60BA00
SCT040VCAVBB60B000
SCT040VCAVXB500000
SCT040VCAVXB600000
SCT040VCAVXB60B000
SCT040VCAVXB60BA00
SCT040VDAVBB500000
SCT040VEAVXB50FA00
SCT040VP0FXB60BA00
SCT040VX0VXB60B000
SCT040VY0FXB60B000
SCT040VY0FXB60BA00
SCT040VY0VBB60MA00
SCT040VY0VXB500000
SCT040VY0VXB50E00P
SCT040VY0VXB60BA00
SCT060VCAFBB60BA00
SCT060VCAFXB60B000
SCT060VCAFXB60BA00
SCT060VCAVXB500000
SCT060VCAVXB600000
SCT060VCAVXB60BA00
SCT060VEAVXB50FA00
SCT060VTAFXB60BA00
SCT060VY0FXB60B000
SCT060VY0FXB60BA00
SCT060VY0VXB500000
SCT060VY0VXB60BA00
SCT080VCAFBB60BA00
SCT080VCAFXB600000
SCT080VCAFXB60B000
SCT080VCAFXB60BA00
SCT080VCAVBB60BA00
SCT080VCAVXB60B000
SCT080VCAVXB60BA00
SCT080VEAVXB50FA00
SCT080VP0FXB60BA00
SCT080VY0FXB60BA00
SCT080VY0VXB500000
SCT080VY0VXB60B000
SCT080VY0VXB60BA00
SCT100VCAVX1600000
SCT100VCAVXB60B000
SCT100VCAVXB60BA00
SCT100VCAVYB60BA00
SCT100VY0VXB500000
SCT100VY0VXB60B000
SCT100VY0VXB60BA00

Recommended Tools and Supplies

  • Drill

  • 1 1/8" Tungsten Carbide Tipped Hole Cutter

  • Cutting Oil

  • 9/64" Drill Bit

  • Center Punch

  • Hammer

  • Fine Point Permanent Marker

  • Pliers

  • Tape Measure

Installation

Install Mounting Hardware

Connect Power

 I-P0002

Part #: C-6204-40

Desc 1: Power Adapter Harness

Desc 2: F2, 12vDC Pow Harness - 40"

   Qty: 1

  1. Connect the C-6204-40 Power Adapter Harness to the H10 connection on the machine control board.

  2. Secure the green wire beneath the ground screw.

  3. Connect the opposite end of the C-6204-40 Power Adapter Harness (3-pin molex) into the back of the F1 Reader.

Connect Coin Sense Harness

 I-S0027

Part #: C-6250

Desc 1: Coin Sense Harness

Desc 2: F2

   Qty: 1

  1. Disconnect the Coin Drop from the Machine Control Assembly.

  2. Connect the C-6250 Coin Sense Harness to the harness connected to the Coin Drop.

Connect Machine Interface Harness

Connect and Mount Reader

 LaundryCard Reader (C-0100, C-0101, C-0102, C-0103)

  1. Feed remaining harness ends through mounting bracket.

  2. For serial setups:

    1. Connect the free end of the Machine Start Harness to port 1 (Serial Connection Port) as shown in the image above.

    2. Connect the free end of the Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.

  3. For coin pulse setups:

    1. Connect the free end of the Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.

  4. Connect the the Cat5 cables running to and from the adjacent machines to ports labeled 3 (Line Connection Ports) as shown in the image above.

  5. Secure the LaundryCard reader to the bracketry using included hardware.

 LaundryCard L2 Reader (C-0103-L2)

L2_Port_Guide.png

  1. Feed remaining harness ends through mounting bracket.

  2. For serial setups:

    1. Connect the free end of the Machine Start Harness to port 1 (Serial Connection Port) as shown in the image above.

    2. Connect the free end of the Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.

  3. For coin pulse setups:

    1. Connect the free end of the Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.

  4. Connect the free end of the Power Harness to port 1.

  5. Secure the L2 reader to base as described in FasCard F2/F3 Reader Installation Guide - Front Mount.

 F1 Reader (C-5001)

  1. Feed remaining harness ends through the mounting hole as described in the F1 Reader Mounting Guide.

  2. Connect the free end of the Machine Start Harness to port 1 (Serial Connection Port) as shown in the image above.

  3. Connect the free end of the Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.

  4. Connect the free end of the Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.

  5. Connect the free end of the Power Extension Harness to port 4 (Power Harness Connection Port) as shown in the image above.

  6. Secure the FasCard reader to base as described in the F1 Reader Mounting Guide.

 F2/FLEX Reader (C-5401, C-5402, C-5402E)

  1. Feed remaining harness ends through the mounting hole as described in FasCard F2/F3 Reader Installation Guide - Front Mount.

  2. For Serial Setups:

    1. Connect the free end of the Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.

    2. Connect the free end of the Machine Start Harness to port 5 (Serial Connection Port) as shown in the image above.

  3. For Pulse Setups:

    1. Connect the free end of the Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.

  4. Connect the free end of the Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.

    1. For dual coin drop setups connect the secondary Coin Sense Harness to port 4 (Coin Sense Harness Connection Port) as shown in the image above.

  5. Connect the free end of the Power Harness to port 1.

  6. Secure the FasCard reader to base as described in FasCard F2/F3 Reader Installation Guide - Front Mount.

 F3 Reader (C-5520, C-5520E)

TODO

Machine Configuration

Alliance Touch Controls

  1. Enter the service menu by touch and holding on the top-center of the touch screen for 3 seconds.

    1. Enter password if required.

  2. Configure the machine with the following settings:

    1. Payment Settings:

      • Card Reader: Enabled

      • Serial Payment System: Enabled

CCI Software Configuration

Machine ControlPulseSerial
Quantum Touch (Midas)SingleVend (MLV+) / 80msAlliance Quantum Touch Washer Extractor

Additional Resources

  • No labels