Skip to end of banner
Go to start of banner

_1160

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

 I-M0193

Part #: C-6971

Desc 1: FC Mounting Bracket

Desc 2: Fagor Machine

   Qty: 1

Part #: C-5420

Desc 1: Screw

Desc 2: 10-32 x ¼" - Pan

   Qty: 2

Part #: C-5416

Desc 1: Screw

Desc 2: 8-32" x 3/8" - Button - Torx

   Qty: 2

Part #: C-5414

Desc 1: F2/F3 Std. Mounting Bracket

Desc 2: Sheet metal base

   Qty: 1

  1. The following steps assume a start harness is already connected to the upper pocket control.

    1. Locate area to mount C-6410 Pulse Stack Add-On Board.

      1. Must be close enough to reader mounting location to connect the harness to.

      2. Must be on a surface that does not received direct exposure from any heating elements (If applicable.)

    2. Clean mounting location to remove any dust and residue if needed.

    3. Remove the sticker from the back of the C-6410 Pulse Stack Add-On Board to expose the adhesive and apply to the mounting location.

    4. Connect the white, 6-pin connector from the C-5353R1-144 Machine Start Harness to the J1 connection on the C-6410 Pulse Stack Add-On Board.

    5. Insert the C-0940 Vault Cover into the coin vault for the lower pocket’s control.

  • No labels