Tools and supplies

Description	Link/Source
Champion CT7-1-1/8 Tungsten Carbide Tipped 1-1/8-Inch Hole Cutter-1-Inch Thick Metal (Or Equivalent)	Amazon
9-64" Drill Bit For drilling stainless steel	Amazon
Cutting Oil	Amazon
Heavy Duty Professional 3-8" Magnesium Drill with #2 drill tip extension. (Or Equivalent)	Harbor Freight
Right Angle Drill Attachment (Or Equivalent, used on some dryer installs)	Amazon
Center Punch (Or Equivalent)	Amazon
Hammer	Amazon
Pliers (Or Equivalent)	Amazon
No.2 Phillips Screwdriver (Or Equivalent)	Amazon
3-32" Head Allen Hex Screwdriver (Or Equivalent)	Amazon
Fine Point Sharpie Marker (Or Equivalent)	Amazon
Tape Measure (Or Equivalent)	Amazon
Cable Ties (Or Equivalent)	Amazon
Electrical Tape (Or Equivalent)	Amazon
FasCard Drill Template *Included with Satellite Install Kit	CCI

Tools and supplies

Description	Link/Source
Champion CT7-1-1/8 Tungsten Carbide Tipped 1-1/8-Inch Hole Cutter-1-Inch Thick Metal (Or Equivalent)	Amazon
9/64" Drill Bit For drilling stainless steel	Amazon
Cutting Oil	Amazon
Heavy Duty Professional 3/8" Magnesium Drill with #2 drill tip extension. (Or Equivalent)	Harbor Freight
Right Angle Drill Attachment (Or Equivalent, used on some dryer installs)	Amazon
Center Punch (Or Equivalent)	Amazon
Hammer	Amazon
Pliers (Or Equivalent)	Amazon
No.2 Phillips Screwdriver (Or Equivalent)	Amazon
3-32" Head Allen Hex Screwdriver (Or Equivalent)	Amazon
Fine Point Sharpie Marker (Or Equivalent)	Amazon
Tape Measure (Or Equivalent)	Amazon
Cable Ties (Or Equivalent)	Amazon
Electrical Tape (Or Equivalent)	Amazon

Assumptions

This document assumes the installer has a working knowledge of hand tools and of the target machine in question. It is recommended that instructions herein be performed by individuals who are qualified to perform these tasks. CCI takes no responsibility for the accuracy of this document, or for any damage that may occur to the target machine.

This document assumes the following items have been acquired and are not a part of the installation kit.

Install Guide

Caution

Always make sure that the power is turned off to the target machine before starting installation.

Always take precautions to protect your eyes and hands when performing an installation.

Images shown

Images in this document may not match the exact machine for which the instructions are designed and are used to help describe procedures

Master Excerpt List

Tools and supplies

Tools and supplies

Assumptions

Install Guide

Card Reader Excerpts