Skip to end of banner
Go to start of banner

_840

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

 I-M0103

Part #: C-0144

Desc 1: Screw

Desc 2: 8-32 x 2" - Flat

   Qty: 2

Part #: C-0905

Desc 1: Drop Cover

Desc 2: 2-3/8" x 4-5/8"

   Qty: 1

Part #: C-6601

Desc 1: Spacer

Desc 2: F2 Dexter Vault Filler Plate

   Qty: 1

Part #: C-6602-V2

Desc 1: F2, Large Vault Mount

Desc 2: Modified version

   Qty: 1

Part #: C-6801

Desc 1: F2/F3 Reader Mounting Kit

Desc 2: Universal

   Qty: 1

  1. Feed the harness ends through the coin vault opening and then through the circular opening in the C-6602 Vault Mount Bracket.

  2. Spread the C-6602 Vault Mount Bracket wings outward and then insert the C-6602 Vault Mount Bracket into the coin vault.

  3. Feed the harness ends through the C-5414 F2 Mounting Bracket and C-6601 Spacer Plate.

  4. Secure the C-5414 F2 Mounting Bracket to the C-6939 Vault Mount Bracket with the C-0144 Screws.

  5. Install the C-5710 Rubber Grommet into the circular opening of the C-5414 F2 Mounting Bracket and C-6601 Spacer Plate.

  6. Remove any existing coin drop.

  7. Mount the C-0905 Drop Cover using existing mounting hardware where the coin drop was previously installed.

  • No labels