Skip to end of banner
Go to start of banner

Replacing Card Dispenser Guide for V2 Cabinets

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Tools Needed - Phillips Head Screw Driver

  1. Unplug cable from card dispenser and empty the card hopper.

  2. Remove bill acceptor cassette

     
  3. Remove 4 screws on the bottom.

     
  4. Remove old card dispenser and replace with new.
  5. Leave screws loose when attaching new card dispenser.
  6. Align card dispenser.
  7. Tighten screws.
  8. Replace bill acceptor cassette.
  9. Plug in cables.
  10. Test

 

  • No labels