Choose Machine Config to assign each machine ID to an equipment type as configured earlier
Prior to this step it is advisable to walk the location with the cabling layout provided by CCI and identify the equipment types for all the machines on the drawing.
- Choose Machine Config
- Touch or click on the first Machine ID on the list.
- Referencing the store layout that was provided with the system enter the appropriate line number, card reader address (almost always the same as the Machine ID), and the Equipment ID (use the table below to choose the appropriate ID).
- Once complete, choose the Save button, then the Next button to move the next numeric machine ID and repeat step 2
- Once you have entered in the values for each of the machines in that numeric series, choose the Back button to return to the Machine ID listing page.
Typically washers start at number 1, and dryers start at 101 representing dryer number 1.
- Using the scroll bars or scroll buttons on the screen to find the next numeric series and repeat steps 2 and 3.
- Once complete with all machine types as identified on the store layout, choose Done