Skip to end of banner
Go to start of banner

Dell Hard Drive Replacement (Optiplex XE2)

Skip to end of metadata
  • Created by Former user, last modified by Former user on Jun 14, 2016
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

Card Concepts Inc takes no responsibility for data loss due to human error, hardware failure, or other such circumstances.

Before opening the computer housing, make sure all  power is disconnected from the unit.

 

Instructions

  1. Remove top lid of computer by pulling the release lever upwards.

                


     
  2. Remove CD-Rom drive by lifting release tab and pulling back.

          


     
  3. Locate hard drive and set its blue tab to unlocked.

         



  4. Lift hard drive casing upward and unplug connection cables

        



  5. Pinch blue tabs and slide hard drive back until fully removed.

         



  6. Remove hard drive from blue casing and install replacement drive, then reverse instructions to reassemble.

         
     

Related Documents

  • No labels