Touch Kiosk Specifications and Requirements
Unit dimensions and power requirements can be found in this section. Unpacking and mounting instructions are found below.
The FasCard Touch Kiosk can be mounted in or on an existing wall or can be pedestal mounted. It offers customers a convenient way to view and manager their Loyalty account, add balance to an existing card, or obtain a new card.
Kiosk Dimensions
| Touch Kiosk | Touch Kiosk Drawer | Kiosk Pedestal Spacer | Kiosk Pedestal Base | |
|---|---|---|---|---|
|
 |
|
| |
| Part #: | C-5610 | C-5623 | C-5626 | C-5628 |
| Desc: | Main Kiosk body- can be pedestal or wall mounted. | Drawer addition to main Kiosk body- can be pedestal or wall mounted. | Kiosk pedestal spacer- not required for wall mount. | Kiosk pedestal- not required for wall mount. |
Electrical Requirements
Always follow local electrical codes.
The FasCard Touch Kiosk operates on 120vac and comes with a standard 12' grounded power cord. The bottom of the base has a 1/2" knock out that can be used to mount a standard 120vac power outlet inside the base. Additional holes may be drilled to accommodate other conduit sizes. Card Concepts Inc. recommends using an outlet with an isolated ground and that an Uninterruptible Power Supply (not included) be used to protect the kiosk from power fluctuations and outages.
Unpacking and Mounting the Touch Kiosk
The Touch Kiosk is packaged in a corrugated shipping assembly with an upper and lower tray as well as a protective front panel and shipping carton. Use caution when cutting securing straps and packing tape.
To view a step by step guide to unpacking the Touch Kiosk, click the arrow adjacent to the header titled 'Unpacking the Touch Kiosk - Step by Step' below.
Mounting the Touch Kiosk
To view mounting instructions, click the arrow next to the appropriately titled header below. Please note that 'Wall' and 'In-Wall' refer to similar but separate types of Touch Kiosk mount.