Skip to end of banner
Go to start of banner

_888

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

 I-C0015

Part #: C-6335

Desc 1: Combination Harness

Desc 2: CGI CR

   Qty: 1

  1. Disconnect the Coin Drop from the Machine Control Assembly.

  2. Connect the C-6335 Combination Harness (3-pin, black connector) to the Coin Eye Sensor.

    1. The White wire (female) spade connectors bundled with the black connector attach to the Coin Block solenoid.

  • No labels