_888

 I-C0015

Part #: C-6335

Desc 1: Combination Harness

Desc 2: CGI CR

   Qty: 1

  1. Disconnect the Coin Drop from the Machine Control Assembly.

  2. Connect the C-6335 Combination Harness (3-pin, black connector) to the Coin Eye Sensor.

    1. The White wire (female) spade connectors bundled with the black connector attach to the Coin Block solenoid.

  3. Connect the Violet wire (male) spade connectors to the Coin Sense Input.

  4. Connect the remaining White wire (male) spade connectors to the Coin Block solenoid drive.