Additional Machine Information

OVERVIEW

The additional info screen allows users to edit the machine-specific model, Serial, and Date in Service information.

ON THIS PAGE

How to Access Additional Machine Information Page

To access this function, your specific Card ID (The 12-digit number on the back of the card) must have ADDITIONAL MACHINE INFORMATION selected under SYSTEM SETUP in permission settings. Please see your store Owner/Manager to update your permission settings. See Permission Settings and Functions for more information on how to set permissions.

Field	Description

Field	Description
Mach.	The machine number assigned at the X-Changer level for the addressed reader. Can be assigned a number above 255 but no higher than 327. Cannot be edited in Additional Machine Info.
Adr.	The machine address assigned at the reader level. Can be different than the Mach. number assigned at the X-Changer level for the addressed reader. Only able to accept assigned machine addresses 001-255 but can overlap the same address as another reader as long as the readers in question are on different lines.
Line	The assigned line the machine is currently connected through. Cannot be edited in Additional Machine Info.
Model #	The machine model number.
Serial #	The machine serial number.
Date in Service	The date the machine was put into service.
LnPosidx	The Line Position Index Entry that indicates where in a single line the reader is physically located.
Debug	Used by the developers – do not edit unless instructed.