Release Notes

Owned by Chris Kite
Last updated: Jan 11, 2024 by Christopher Patac
9 min read
OVERVIEW

This document lists the revisions to LaundryCard software.

v9.2.2 (January 11, 2024)

  • Fixes issue where previous loyalty card information would stay on screen after a credit card transaction even if the card was removed before the transaction was completed.

  • Fixes issue where X-Changers could potentially lock up on the ‘Remove Card Quickly’ screen under a unique transaction sequence.

  • Fixes issue where clicking the ‘Save’ link in Equipment Details pages would generate an error.

  • Additional bug fixes and improvements, including screen transparency reversion.

v9.2.1 (December 18, 2023)

  • Fixes issue where the “Credit/Debit Card ONLY” message shows when an X-Changer is unable to accept cash even if credit cards are not configured.

  • Fixes issue where the screen can transition too quickly back to the homepage when attempting to complete a new card purchase with a credit card.

  • Fixes issue where a configured registration bonus could be awarded on every registration save when all card registration fields are made optional.

  • Fixes issue where the last 4 of a credit card number does not show in the Escrow page for stores using Ingenico credit card readers.

  • Fixes issue where the X-Changer may remain paused on the ‘Remove Card’ page under unique conditions.

  • Fixes issue where the ‘Edit' button was missing from the ‘Additional Machine Info’ screen.

  • Fixes issue where the X-Changer camera can cause a memory leak under rare conditions.

  • Support added for new model LaundryCard Access Points (LCAPs) for Wireless LaundryCard (L2) readers on core 100 and newer firmware.

    • L2 status reporting functions on new LCAPs require core 102 or newer firmware.

    • With the Wireless LaundryCard initial launch, the maximum number of allowed wireless card readers have been increased.

  • Improved formatting of Card Reader/Line Status display formatting on the Store Status page.

  • Improvements to the swipe sequence for Electronic Benefits Transfer (EBT) cards.

  • Status and logging improvements.

  • Additional bug fixes and improvements.

v9.2.0 (June 6, 2023)

  • Fixes issue where LaundryCard processes do not work correctly with LCRFs using a non 6-byte hexadecimal serial number.

  • Fixes issue where the barcode on the last card in a card dispenser fails to read.

  • Support for new reader firmware versioning scheme (e.g. core 100 and newer firmware).

  • Added ability to choose which registration fields are required or optional when registering a loyalty card.

  • Coupons now automatically apply on dispense if an added coupon specifically applies to newly dispensed cards.

  • Credit Card Transactions report now includes a summary table and filter dropdowns for transaction method and card type.

  • Improvements to tracking credit card types and methods used in a credit card transaction.

  • Improvements to Store Status including extended card reader table details and error reporting.

  • Improvements to Equipment Details pages to support current and future firmware and reader implementations.

  • Improvements to Tsentry status reporting and logging for every devices and applicable process.

  • Additional bug fixes and improvements.

v9.1.10 (October 11, 2022)

  • Improvement to the user interface involving a direct link between machine numbers and equipment type details for management and authorized personnel.

  • Fixes issue where Authorize.Net transactions were not properly reporting in the Credit Card Transactions report.

  • Fixes compatibility issue involving Laundrylux Compass (Gen6) Washer support.

  • Additional bug fixes and improvements.

v9.1.9 (September 13, 2022)

  • Official support added for Electronic Benefits Transfer (EBT) cards (more information can be found here: Accepting EBT in Your LaundryCard Store - Requirements & Pricing).

  • Improvements to Electronic Benefits Transfer (EBT) acceptance protocols, page functions, and usage reporting.

  • Improvements and fixes to database synchronization in conjunction with X-Changer scheduled tasks and cleanup.

  • Improved reporting of reused and pre-valued cards and the methods of payment / issuance used.

  • Improvements to the Configure Hardware tool hardware recognition, setup, and logging.

  • Support for Zuljana Touchscreen Monitors for LaundryCard V2 cabinets.

  • Improved support for Electrolux Clarus Vibe Washers.

  • Added ability to allow or restrict other employee users from being able to view/edit other employee users' LaundryCards.

    • Note: Any manager-tier card prior to v9.1.9 install will continue to retain this access feature. All other employee tiers will have this feature disabled by default until permissibly enabled.

  • Fixes issue where the incorrect amount was taken from card bonus for adjustment transactions (top-offs, cycle changes) when the original start used balance.

  • Fixes issue when Credit Card transactions using the Classic User Interface resulted in a script error; not allowing credit cards to process.

  • Fixes issue where employees are still required to clock in to start a machine even if their individual card does not require clock-in/out.

  • Fixes to calculated totals in individual customer card details to align with customer's reported balance.

  • Fixes issue where cash bonus checkboxes for the $1.00 tier were not visible.

  • Fixes issue where Technician cards are unable to view Equipment Status.

  • Additional bug fixes and improvements.

v9.1.8 (May 16, 2022)

  • Official support added for various Advanced LaundryCard Live (ALCL) features (available with an Advanced LaundryCard Live (ALCL) Subscription).

  • Improved reporting, error detection, and notification between in-store X-Changers and the LaundryCard Live servers.

  • Fixes a number of calculated balances and totals in a number of reports to align with ALCL reports.

  • Fixes issue with advertising logic regarding set start and end dates and permanent ad fixtures.

  • Fixes issue where non-customer cards were recoverable from the card recovery screen.

  • Added ability to disable allowing bonuses with cash purchases while credit cards are enabled.

  • Support added for the refreshed model ELP X-Changer cameras.

  • Additional bug fixes and improvements.

v9.1.7 (February 28, 2022)

  • Fixes authorization issue involving the C-1009-LC EMV Credit Card Bezel and Worldnet.

  • Fixes issue where coupon bonuses were rewarded twice on rare occasions.

  • Fixes issue where Point-of-Sale services could still recognize Loyalty cards after transferring to another store.

  • Ability to Enable Bonus use with Point-of-Sale services added.

  • Support for timed advertising screens based on set start/stop dates added (Requires Technical Support setup).

  • Initial support added for Electronic Benefits Transfer (EBT) card acceptance protocols.

  • Improvements to credit card swipes with magstripe-only Credit/Debit/EBT cards when using Worldnet.

  • Credit Card Reader models are now visible on the Store Status page.

  • Report retrieval improvements.

  • Additional bug fixes and improvements.

v9.1.6 (January 7, 2022)

  • Fixes compatibility issue involving the C-1009-LC EMV Credit Card Bezel, Worldnet, and the TSYS Merchant Processor.

v9.1.5 (November 18, 2021)

  • Fixes rare issue where a loyalty card can reach a negative balance with a pre-V9 bonus setting manually enabled.

  • Official support added for Dexter C-Series Washer Extractors using Dexter Machine Firmware 2.2/5.0 Protocol.

  • Updated graphics and audio for the C-1009 EMV Credit Card Bezel when installed and configured on an X-Changer.

  • Backend software updates for the C-1008 Ingenico EMV Credit Card Reader.

  • Bill Acceptor model name now present on the Store Status screen.

  • All communication (COM) ports now display in Store Status.

  • Updates to the processes of configuring hardware.

  • Additional bug fixes and improvements.

v9.1.4 (September 30, 2021)

  • Fixes CSV report issues involving commas and line spacing.

  • Fixes uncommon issue involving reporting 0 errors for card dispense attempts.

  • Customer photos will now enlarge in card details when clicked/tapped. (Requires K-1407 v9 Camera Mounting Kit)

  • Collections performed using a collector card with an email address saved will also email the collection receipt.

  • Collection tickets can now be emailed to a select number of email addresses of the user's choosing.

  • Support added for the C-1009 VP3300 EMV Bezel for use on V2 Cabinets with MEI Bill Note Acceptors (BNAs).

  • Support added for Worldnet credit card processor.

  • Support added for Pyramid Bill Note Acceptors (BNAs).

  • Individualized support added for Continental Profit Plus Delicate Washers.

  • Individualized support added for Continental Profit Plus Extra Spin Washers.

  • Application closing and restart improvements.

  • Additional bug fixes and improvements.

v9.1.3 (June 11, 2021)

  • Fixes issue with API that caused a transaction error when charging a laundry card.

  • Fixes reporting of credit card surcharges.

  • Fixes issue where the cash amount reported in escrow was incorrect.

  • Adds support for newer Continental machines for the new Sanitize upgrade.

  • Additional bug fixes and improvements.

v9.1.2 (April 28, 2021)

  • Fixes issue with individual reports remaining visible (but not accessible) when the permission to view a specific report is unchecked.

    • Any unchecked reports in Card Permissions will now no longer populate in the 'Reports' menu.

  • Fixes issue where Daily Credit Card limit was still being honored despite service type being Datacap.

  • Adds ability to allow customers to still use credit cards when the bill acceptor is not functional.

  • (Alongside LaundryCard Live's April 2021 release) adds compatibility with LaundryCard Live's new feature of allowing custom permissions to be set for an individual Live user.

  • Adds Datacap software direct integration.

  • Improvements to C:\ drive space management.

  • Additional bug fixes and improvements.

v9.1.1 (November 17, 2020)

  • Fixes issue with API that caused a 500 error when charging a laundry card.

  • Fixes issue with multi-store license update failing during store group synchronization in LaundryCard Live.

  • Additional bug fixes and improvements.

v9.1.0 (October 16, 2020)

  • Adds ability to charge a service fee for credit card transactions.

  • Adds ability to override the timeout on the customer registration screen.

  • Fixes issue where the Bonus Redemption Rate is set to 0% when saving on the General Info screen.

  • Fixes issue where custom card artwork is not displayed on the customer account info screen.

  • Additional bug fixes and improvements.

v9.0.9 (May 27, 2020)

  • Fixed issue where Coupon Programs could be created without an end date and then were no longer editable.

  • Fixed issue with default configuration for Alliance ACA H7S TLW A1 and FLW A1 equipment that would cause cycle to stop shortly after it started.

  • Added support for Alliance ACA H7S Washer Extractor - Galaxy 500 (A20).

  • Added monitoring for low disk space.

  • Added monitoring for database disk backup failures.

  • Added additional configuration settings for Wascomat/Electrolux Compass Pro washers.

  • Additional bug fixes and improvements.

v9.0.8 (March 26, 2020)

  • Fixed issue with credit card amount not clearing when pressing the Clear button while using the Classic interface.

  • Fixed issue with images for accepted credit card types not appearing when using Ingenico credit card device.

  • Fixed issue with Alliance ACA H7S Top-Load Washer MDC II (A1) configuration

  • Fixed issue where snapshot reports generated on Feb 28th of a leap year do not show in Monthly report.

  • Fixed issue where occasionally the X-Changer is stuck on "Follow instructions on card reader" when using Ingenico credit card device.

  • Adds scroll buttons to Reports Menu drop-down when viewed remotely.

  • Adds support for LG Titan Pro Washers.

  • Adds support for Alliance ACA H7S Washer Extractor Quantum+ (A44).

  • Additional bug fixes and improvements.

v9.0.7 (January 20, 2020)

  • Fixed issue when performing collections using card numbers starting with 0.

  • Fixed issue with detecting the barcode scanner model on the Store Status screen.

  • Fixed issue when clicking "Done" on the main management screen during a remote session via VPN or LaundryCard Live.

  • Additional bug fixes.

v9.0.6 (January 7, 2020)

  • Internal release.

v9.0.5 (December 13, 2019)

  • On the Reports screen, the 3 most recently accessed reports are shown at the top of the list.

  • If a credit card type (Amex, Visa, etc) is not accepted, a descriptive error is now shown to the user.

  • Partial credit card authorizations now authorize only the amount available on the credit card.

  • Fixed issue where generic cards starting with "999..." would not transfer at multi-store enabled locations.

  • Fixed issue where free dries were clearing off cards when the "Free Dry Limit" feature was disabled.

  • Additional bug fixes/improvements.

v9.0.4 (August 21, 2019)

  • The style of the "Issues that Require" attention panel has been updated to be more noticeable.

  • Added support for 3 and 4 X-Changer stores.

  • Improved performance of the Totals History Report. Should now generate much faster.

  • Fixed "ExportData.txt: Error copying files to backup" error.

  • Fixed "SeaPort Monitoring.txt: Maximum Rescan Attempts Reached" error that would occasionally occur on systems using IDT credit card swipes.

  • Disabled support for partial credit card payments. If a credit card does not have enough funds for the total charge amount, the transaction will be declined.

  • Fixed issue where the "W2W Bonus Money" was not displayed in the details pane on the customer's account overview.

  • Fixed issue where the reports menu dropdown would not scroll smoothly on iOS devices.

  • Additional bug fixes/improvements.

v9.0.3 (June 13, 2019)

  • Improved database synchronization time for large databases.

  • Fixed issue with temperature values on Alliance Centurion dryer configuration screen.

  • Fixed issue where reader indefinitely displays "Updating Machine Config" on a newly added Alliance Quantum Gold Small Dryer.

  • Fixed issue where occasionally X-Changer gets stuck on "Processing" when using a credit card and the system is configured for Authorize.Net.

  • Fixed issue where occasionally reader/machine price does not update after setting a new price.

  • Additional bug fixes/improvements.

v9.0.2 (May 8, 2019)

  • Added serial integration support for large chassis Alliance Midas Washer-Extractor and Tumbler-Dryer equipment.

  • Fixed issue where management screen was accessible through LaundryCard Live if the manager card had a PIN set.

  • Fixed issue where screen prompts indicated to insert and remove card even when the system was configured to require the card to remain in the reader.

  • Fixed issue where occasionally the Store Status screen would display an error and not load.

  • Fixed issue where occasionally the Equipment Details screen would display an error and not load.

  • Fixed issue where Equipment Details screen would not save when accessed through LaundryCard Live.

  • Fixed issue where custom screen message was not shown after customer added value via credit card and chose to print a receipt.

  • Additional bug fixes and improvements.

v9.0.1 (April 8, 2019)

  • First official release of LaundryCard Version 9.

  • Added serial integration support for large chassis Alliance Midas Washer-Extractor and Tumbler-Dryer equipment.

  • Additional bug fixes and improvements.