LG Giant-C Washer Programming
- Former user (Deleted)
- Adam Arafat
Owned by Former user (Deleted)
Overview
This document provides a general overview of setting LG C-Washers into "Card mode".
DO NOT USE CARD MODE FOR PULSE CONFIGURATIONS
The machine requires a special command from a serial harness to be set back into coin mode.
Installation prerequisite
Check the Machine Start Harness to verify that you are using the Serial Connector, pictured below.
 |  |
Serial connector | Pulse connector |
Vend type programming
Before the vend type can be set on the reader, the machine must be in Programming Mode.