/
Enabling serial communication on Continental washers

Enabling serial communication on Continental washers

Overview

This page is intended to guide the user through the process of enabling serial (multivend) communication on Continental washers utilizing the serial communication daughter-board add-on.

  • This document assumes the installer is technically familiar with Continental Washers-Extractors. 

  • This procedure is required to allow the host machine to communicate to CCI card reader with a serial interface, which supports multi-level pricing and cycle configuration from CCI LaundryCard and CCI FasCard systems.

  • This page is provided by CCI as a courtesy. If the instructions prove to be inaccurate, please contact the product manufacturer for complete programming instructions.

Programming Instructions 

  1. Open washer door

  2. Press and hold the 1 key until 'Cod' appears on the display.

  3. Press 1,2,3,4,1,2,3,4

  4. 'Pro' appears on the display, press the 2 key repetitively until 'nod' appears on the display

  5. Press the 1 key repetitively until 'Id-0- appears on the display

  6. Press the 2 key one time, 'Id-1' appears on the display

  7. Press the 1 key one time

  8. Press the Stop key

Related content

How-to enable Card Reader Communications (Card Mode) on Machines
How-to enable Card Reader Communications (Card Mode) on Machines
Read with this
Enabling Serial Communication on Continental Coin Control and ProfitPlus Washers
Enabling Serial Communication on Continental Coin Control and ProfitPlus Washers
More like this
Machine Configuration
Machine Configuration
More like this
Equipment Serial Integration Support
Equipment Serial Integration Support
More like this
Alliance A-Micro Serial Upgrade Guide
Alliance A-Micro Serial Upgrade Guide
More like this
Serial to Pulse Reversion Guide
Serial to Pulse Reversion Guide
More like this