/
FasCard Satellite Mounting Guide
FasCard Satellite Mounting Guide
Overview
This document will provide the installer with the mounting dimension for the FasCard Satellite Access Point (SAP).
Satellite requirements
The following requirements must be met, where applicable:
The SAP should be mounted as close to the center of all FasCard equipment as possible.
The SAP is recommended to be mounted on a ceiling, where available.
If mounting on a wall, the SAP should be mounted high up, in the center of all FasCard equipment.
Satellite dimensions (W x L x H)
11CM x 13CM x 3CM
4.33" x 5.11" x 1.18"
Mounting Hole Dimensions
70mm or 2.75" between both holes
, multiple selections available,
Related content
FasCard Satellite (SAT) Installation
FasCard Satellite (SAT) Installation
More like this
Test and Trust Authorization Mode
Test and Trust Authorization Mode
Read with this
FasCard Satellite Access Point (SAP)
FasCard Satellite Access Point (SAP)
More like this
FasCard Cellular Modem Router (CMR) Network Installation
FasCard Cellular Modem Router (CMR) Network Installation
Read with this
FasCard Admin Site - Satellite Configuration
FasCard Admin Site - Satellite Configuration
More like this
3584 Reader Install Guide
3584 Reader Install Guide
Read with this