_673

Owned by Chris Kite
Jan 24, 2024
1 min read

 I-M0018

Part #: C-0015

Desc 1: Label

Desc 2: Reader Cover Label

   Qty: 1

Part #: C-0031

Desc 1: Label

Desc 2: Dexter Instruction Panel

   Qty: 1

Part #: C-0134

Desc 1: Standoff

Desc 2: 8-32" x 1" - Hex

   Qty: 2

Part #: C-0905

Desc 1: Drop Cover

Desc 2: 2-3/8" x 4-5/8"

   Qty: 1

Part #: C-0906

Desc 1: Spacer Plate

Desc 2: 5 1/2" x 4 3/8"

   Qty: 1

Part #: C-0936

Desc 1: Vault Mount Bracket

Desc 2:

   Qty: 1

Part #: C-1043

Desc 1: Screw

Desc 2: 8-32 x 1-3/4" - Flat

   Qty: 2

  1. Remove existing coin box and coin drop.

  2. Bend the side tabs of the C-0936 Bracket outward and install into the coin vault. The tabs should snap into place securing the bracket.

  3. Attach the C-0134 Standoffs to the Bracket.

  4. Install C-0905 Drop Cover where the coin drop was previously installed. Secure in place using existing hardware.

    1. Apply C-0031 Label on to Drop Cover.

  5. Place C-0906 Spacer Plate over coin vault opening between the reader and machine.