_727

Owned by Chris Kite
Jan 25, 2024
1 min read
 I-M0020

Part #: C-0015

Desc 1: Label

Desc 2: Reader Cover Label

   Qty: 1

Part #: C-0031

Desc 1: Label

Desc 2: Dexter Instruction Panel

   Qty: 1

Part #: C-0133

Desc 1: Standoff

Desc 2: 8-32" x 1-1/2" - Hex

   Qty: 2

Part #: C-0140

Desc 1: Screw

Desc 2: 8-32 x 3/4" - Cap

   Qty: 2

Part #: C-0906

Desc 1: Spacer Plate

Desc 2: 5 1/2" x 4 3/8"

   Qty: 1

Part #: C-0936

Desc 1: Vault Mount Bracket

Desc 2:

   Qty: 1

Part #: C-0963

Desc 1: Drop Cover

Desc 2: 2-3/8" x 4-5/8" - Black

   Qty: 1

Part #: C-1062

Desc 1: Nut

Desc 2: 4-40 - Kep

   Qty: 4

  1. Remove existing coin box and coin drop.

  2. Install C-0963 Coin Drop Cover into the coin drop opening. Secure using C-1062 Keps Nuts.

  3. Apply C-0031 Label over the C-0963 Drop Cover.

  4. Bend the side tabs of the C-0936 Vault Bracket outward and install into the coin vault. The tabs should snap into place securing the bracket.

  5. Attach the C-0133 Standoffs to the C-0936 Vault Bracket.

  6. When ready to mount the reader, run the reader harnesses through the vault opening and the C-0906 Spacer Plate. Line up the screw holes of the C-0906 Spacer Plate with the C-0133 Standoffs.

  7. Insert the reader into the opening and secure using the C-0140 Screws.

  8. Apply C-0015 Reader Cover Label over the reader screw mounting holes.

Â