_731
- Chris Kite
Part #: C-0015
Desc 1: Label
Desc 2: Reader Cover Label
Qty: 1
Part #: C-0031
Desc 1: Label
Desc 2: Dexter Instruction Panel
Qty: 1
Part #: C-0906
Desc 1: Spacer Plate
Desc 2: 5 1/2" x 4 3/8"
Qty: 1
Part #: C-0970R1
Desc 1: Revised Mounting Bracket
Desc 2: Multi-Purpose
Qty: 1
Part #: C-5751
Desc 1: Screw
Desc 2: 8-32 x 2-1/2" - Flat
Qty: 2
Apply C-0031 Label to cover the Easy Card slot.
Using the C-0970R1 Mounting Bracket, mark out cutting lines on the front panel of the machine near where a coin vault would normally be mounted. Mark the central opening, along with the two threaded holes to the sides of the central opening.
Place the C-0970R1 Mounting Bracket on the inside of the panel, and C-0906 Spacer on the outside of the panel. Then secure all components and reader in place using C-5751 Screws.