_603-2
- Chris Kite
Part #: C-0110-TOP
Desc 1: Machine Start Harness
Desc 2: 36" - Alliance Pre-ACA
Qty: 1
Part #: C-0110-CP
Desc 1: Jumper Plug
Desc 2: Enables card mode on pre-ACA
Qty: 1
Coin Slide Hybrid - Small Dryer (Stack)
Connect the C-0110-TOP Machine Start Harness to the H3 connector on the Machine Control Assembly.
Connect the C-0110-CP Jumper Plug to the H6 connection on the Machine Control Assembly.
Part #: C-0110-TOP
Desc 1: Machine Start Harness
Desc 2: 36" - Alliance Pre-ACA
Qty: 1
Part #: C-0110-CP
Desc 1: Jumper Plug
Desc 2: Enables card mode on pre-ACA
Qty: 1
MDC Control - Top-Load Washer
Connect the C-0110-TOP Machine Start Harness to the machine control assembly at H5.
(Serial Communication Setup Only) Remove the existing Alliance Jumper Plug at H2 and connect the C-0110-CP Jumper Plug to the machine control assembly.
Part #: C-0110-TOP
Desc 1: Machine Start Harness
Desc 2: 36" - Alliance Pre-ACA
Qty: 1
Part #: C-0110-CP
Desc 1: Jumper Plug
Desc 2: Enables card mode on pre-ACA
Qty: 1
Washer Extractor - Centurion
Connect the C-0110-TOP Machine Start Harness to the H3 connector on the Machine Control Assembly.
Connect the C-0110-CP Jumper Plug to the H6 connection on the Machine Control Assembly.
Part #: C-0110-TOP
Desc 1: Machine Start Harness
Desc 2: 36" - Alliance Pre-ACA
Qty: 1
Part #: C-0110-CP
Desc 1: Jumper Plug
Desc 2: Enables card mode on pre-ACA
Qty: 1
Tumble Dryer - Centurion/MDC
Connect the C-0110-TOP Machine Start Harness to the H3 connector on the Machine Control Assembly.
Part #: C-0110-TOP
Desc 1: Machine Start Harness
Desc 2: 36" - Alliance Pre-ACA
Qty: 1
Part #: C-0110-CP
Desc 1: Jumper Plug
Desc 2: Enables card mode on pre-ACA
Qty: 1
Equip 3586
Connect the C-0110-TOP Machine Start Harness to the H3 connector on the Machine Control Assembly.
Connect the C-0110-CP Jumper Plug to the H6 connection on the Machine Control Assembly.
Part #: C-0110-TOP
Desc 1: Machine Start Harness
Desc 2: 36" - Alliance Pre-ACA
Qty: 1
Part #: C-0110-CP
Desc 1: Jumper Plug
Desc 2: Enables card mode on pre-ACA
Qty: 1
Equip 3586
Connect the C-0110-TOP Machine Start Harness to the H3 connector on the Machine Control Assembly.
Part #: C-0110-TOP
Desc 1: Machine Start Harness
Desc 2: 36" - Alliance Pre-ACA
Qty: 1
Part #: C-0110-CP
Desc 1: Jumper Plug
Desc 2: Enables card mode on pre-ACA
Qty: 1
Equip 3198
Remove the existing Alliance Jumper Plug at H8 and connect the C-0110-CP Jumper Plug.
Connect the C-0110-TOP Machine Start Harness to the H5 connection on the Machine Control Assembly.
Part #: C-0110-TOP
Desc 1: Machine Start Harness
Desc 2: 36" - Alliance Pre-ACA
Qty: 1
Part #: C-0110-CP
Desc 1: Jumper Plug
Desc 2: Enables card mode on pre-ACA
Qty: 1
Equip 3314
Connect the C-0110-TOP Machine Start Harness to the H3 connector on the Machine Control Assembly.
Connect the C-0110-CP Jumper Plug to the H6 connection on the Machine Control Assembly.