_737
- Chris Kite
Part #: C-0014S
Desc 1: Label
Desc 2: TD LC Window
Qty: 1
Part #: C-0015S
Desc 1: Label
Desc 2: TD30 Insert Card Graphic
Qty: 1
Part #: C-0940
Desc 1: Vault Cover
Desc 2: 3-7/8" x 2-3/4"
Qty: 1
Part #: C-0968
Desc 1: Flat Mount Bezel
Desc 2: For Wascomat TD30x30
Qty: 1
Part #: C-1042
Desc 1: Nut
Desc 2: 8-32 - Kep
Qty: 4
Part #: C-1068
Desc 1: Screw
Desc 2: #8-32 x 5/16 - Flat Cap
Qty: 4
Remove existing coin box and coin drop.
Bend the side tabs of the C-0940 Vault Cover outward and install into the coin vault. The tabs should snap into place securing the bracket.
Remove the existing reader bezel and attach the C-0968 Flat Mount Bezel as detailed in the LaundryCard Reader Flat-Mount Bezel Installation guide.
Install the C-0968 Flat Mount Bezel where the coin drop was previously installed. Secure using C-1042 Nuts and C-1068 Screws.