_620

 I-M0011

Part #: C-0132

Desc 1: Standoff

Desc 2: 8-32" x 2" - Hex

   Qty: 2

Part #: C-0141

Desc 1: Screw

Desc 2: 8-32 x 1-1/2" - Cap

   Qty: 2

Part #: C-0905

Desc 1: Drop Cover

Desc 2: 2-3/8" x 4-5/8"

   Qty: 1

Part #: C-0906

Desc 1: Spacer Plate

Desc 2: 5 1/2" x 4 3/8"

   Qty: 1

Part #: C-0936

Desc 1: Vault Mount Bracket

Desc 2:

   Qty: 1

Part #: C-5027

Desc 1: Label

Desc 2: Credit Card Logo

   Qty: 1

  1. Remove existing coin box and coin drop.

  2. Bend the side tabs of the C-0936 Vault Bracket outward and install into the coin vault. The tabs should snap into place securing the bracket.

  3. Attach the C-0132 Standoffs to the Bracket.

  4. Line up the screw holes on the C-0906 Spacer Plate with the C-0141 Standoffs. Place reader over C-0906 Spacer Plate and secure with C-0141 Screws.

  5. Install C-0905 Drop Cover where the coin drop was originally. Use existing hardware to secure.

  6. Optional: Apply C-5027 Label near, or on the reader for any accepted credit card issuer.