_730

Owned by Chris Kite
Jan 24, 2024
1 min read

 I-M0022

Part #: C-0015

Desc 1: Label

Desc 2: Reader Cover Label

   Qty: 1

Part #: C-0906

Desc 1: Spacer Plate

Desc 2: 5 1/2" x 4 3/8"

   Qty: 1

Part #: C-0970R1

Desc 1: Revised Mounting Bracket

Desc 2: Multi-Purpose

   Qty: 1

Part #: C-5751

Desc 1: Screw

Desc 2: 8-32 x 2-1/2" - Flat

   Qty: 2

  1. Using the C-0970R1 Mounting Bracket, mark out cutting lines on the front panel of the machine near where a coin vault would normally be mounted. Mark the central opening, along with the two threaded holes to the sides of the central opening.

  2. Place the C-0970R1 Mounting Bracket on the inside of the panel, and C-0906 Spacer on the outside of the panel. Then secure all components and reader in place using C-5751 Screws.